Excavator attachment supply · Ningbo, China Search · FAQ · Support · Market / EnglishWhatsApp +86 15058273161
WE-ATTACH

WE-ATTACH / EXCAVATOR ATTACHMENTS

Demolition & Recycling

Begin with the material and work stage: breaking in place, processing concrete rubble, cutting steel, sorting or transferring material. A similar-looking jaw does not make those tools interchangeable.

Explore the work stages

START WITH THE WORK

Choose the tool for each demolition stage.

01

Separate structural breaking from rubble processing

State whether the material is still part of a structure or already on the ground. Include section size, reinforcement, access and desired result before comparing a breaker, crusher or pulverizer. Compare the supplied crusher and pulverizer forms separately; a rotation or magnet arrangement does not establish a different concrete-processing or lifting rating without the applicable model data.

Explore this work scenario
02

Specify the steel-cutting step

Give the material section, thickness and required mounting position. Jaw opening and a generic shear name do not establish the cutting capability for your steel.

Explore this work scenario
03

Sort and transfer the material

Describe the mixed material, size, shape and expected handled load. Select jaw/tine form and rotation needs separately from the machine lifting envelope.

Explore this work scenario
04

Define size reduction or separation

Crushing reduces material size; screening separates a specified fraction. State feed conditions, moisture and intended output so the process can be discussed clearly.

Explore this work scenario
05

Separate the dismantling tool from the holding frame

For a vehicle-dismantling proposal, describe the material, access and required work sequence. The dismantling shear is a cutting configuration; the pressing frame is a separate holding arrangement. Keep their mounting, carrier and hydraulic information distinct and request the relevant drawings for the proposed setup.

Explore this work scenario
06

Identify the breaker and its lubrication requirements

Keep the full breaker model, lubrication points and operating information with the service requirement. An automatic grease device is a support component, not an alternative breaking tool. Confirm the actual connection, lubricant requirements and service instructions for the proposed breaker configuration.

Explore this work scenario

The material and work stage

Begin with the material and work stage: breaking in place, processing concrete rubble, cutting steel, sorting or transferring material. A similar-looking jaw does not make those tools interchangeable.

Information for the configuration review

Material/section/reinforcement; primary or secondary processing; tool position; circuit; machine stability and working envelope.

Documents to keep with the proposal

Keep the complete model/suffix, machine and mounting information with the relevant drawing and operating requirements. The work stages above identify the product and document paths for this application.

Application scope

These are selection pathways drawn from the supplied product material. Confirm the exact configuration and site conditions; no customer project or measured site result is represented by the product photographs.

Start with the relevant attachment family

Model references and source specifications for this industry

Hydraulic Steel Shears ↗

Model-specific source values · original fields and units retained
Complete modelSource specification snapshotDetails & download
WHS08 ↗
SUITABLE EXCAVATOR, T
6-13
CYLINDER OIL FLOW, L/MIN
50-100
MOTOR OIL FLOW, L/MIN
20-30
Source P03 · p.15 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WHS25 ↗
SUITABLE EXCAVATOR, T
18-27
CYLINDER OIL FLOW, L/MIN
180-240
MOTOR OIL FLOW, L/MIN
30-50
Source P03 · p.15 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WHS30 ↗
SUITABLE EXCAVATOR, T
20-30
CYLINDER OIL FLOW, L/MIN
180-240
MOTOR OIL FLOW, L/MIN
30-50
Source P03 · p.15 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WHS40 ↗
SUITABLE EXCAVATOR, T
30-40
CYLINDER OIL FLOW, L/MIN
180-240
MOTOR OIL FLOW, L/MIN
30-50
Source P03 · p.15 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WHS55 ↗
SUITABLE EXCAVATOR, T
45-60
CYLINDER OIL FLOW, L/MIN
300-500
MOTOR OIL FLOW, L/MIN
40-60
Source P03 · p.15 ↗
All parameters and conditions ↗
Download reference · CSV ↗

Eagle Shears ↗

Model-specific source values · original fields and units retained
Complete modelSource specification snapshotDetails & download
WES08 ↗
SUITABLE EXCAVATOR (ARM TYPE), T
6-10
SUITABLE EXCAVATOR (BOOM TYPE), T
/
CYLINDER OIL FLOW, L/MIN
60-120
Source P03 · p.17 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WES18 ↗
SUITABLE EXCAVATOR (ARM TYPE), T
13-20
SUITABLE EXCAVATOR (BOOM TYPE), T
8-14
CYLINDER OIL FLOW, L/MIN
140-240
Source P03 · p.17 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WES25 ↗
SUITABLE EXCAVATOR (ARM TYPE), T
20-35
SUITABLE EXCAVATOR (BOOM TYPE), T
13-25
CYLINDER OIL FLOW, L/MIN
180-240
Source P03 · p.17 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WES40 ↗
SUITABLE EXCAVATOR (ARM TYPE), T
30-38
SUITABLE EXCAVATOR (BOOM TYPE), T
20-28
CYLINDER OIL FLOW, L/MIN
200-250
Source P03 · p.17 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WES50 ↗
SUITABLE EXCAVATOR (ARM TYPE), T
40-60
SUITABLE EXCAVATOR (BOOM TYPE), T
35-40
CYLINDER OIL FLOW, L/MIN
300-500
Source P03 · p.17 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WES60 ↗
SUITABLE EXCAVATOR (ARM TYPE), T
60-70
SUITABLE EXCAVATOR (BOOM TYPE), T
40-50
CYLINDER OIL FLOW, L/MIN
300-560
Source P03 · p.17 ↗
All parameters and conditions ↗
Download reference · CSV ↗

CR Hydraulic Crushers ↗

Model-specific source values · original fields and units retained
Complete modelSource specification snapshotDetails & download
WCR10 ↗
SUITABLE EXCAVATOR,T
11-16
CYLINDER OIL FLOW,L/MIN
60-120
MOTOR OIL FLOW,L/MIN
20-30
Source P03 · p.18 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WCR15 ↗
SUITABLE EXCAVATOR,T
17-25
CYLINDER OIL FLOW,L/MIN
140-240
MOTOR OIL FLOW,L/MIN
30-50
Source P03 · p.18 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WCR20 ↗
SUITABLE EXCAVATOR,T
26-35
CYLINDER OIL FLOW,L/MIN
180-240
MOTOR OIL FLOW,L/MIN
30-50
Source P03 · p.18 ↗
All parameters and conditions ↗
Download reference · CSV ↗

CC Hydraulic Crushers ↗

Model-specific source values · original fields and units retained
Complete modelSource specification snapshotDetails & download
WCC10 ↗
SUITABLE EXCAVATOR,T
6-13
CYLINDER OIL FLOW,L/MIN
50-100
MOTOR OIL FLOW,L/MIN
20-30
Source P03 · p.19 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WCC15 ↗
SUITABLE EXCAVATOR,T
17-25
CYLINDER OIL FLOW,L/MIN
140-240
MOTOR OIL FLOW,L/MIN
30-50
Source P03 · p.19 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WCC20 ↗
SUITABLE EXCAVATOR,T
26-35
CYLINDER OIL FLOW,L/MIN
180-240
MOTOR OIL FLOW,L/MIN
30-50
Source P03 · p.19 ↗
All parameters and conditions ↗
Download reference · CSV ↗

Car Dismantling Shears ↗

Model-specific source values · original fields and units retained
Complete modelSource specification snapshotDetails & download
WVS18L ↗
SUITABLE EXCAVATOR,T
13-25
CYLINDER OIL FLOW,L/MIN
180-200
MOTOR OIL FLOW,L/MIN
30-50
Source P03 · p.20 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WVS20 ↗
SUITABLE EXCAVATOR,T
20-30
CYLINDER OIL FLOW,L/MIN
180-240
MOTOR OIL FLOW,L/MIN
30-50
Source P03 · p.20 ↗
All parameters and conditions ↗
Download reference · CSV ↗

Rotating Pulverizers ↗

Model-specific source values · original fields and units retained
Complete modelSource specification snapshotDetails & download
WRP18C ↗
SUITABLE EXCAVATOR,T
15-20
CYLINDER OIL FLOW,L/MIN
140-240
MOTOR OIL FLOW,L/MIN
30-50
Source P03 · p.21 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WRP20 ↗
SUITABLE EXCAVATOR,T
20-30
CYLINDER OIL FLOW,L/MIN
180-240
MOTOR OIL FLOW,L/MIN
30-50
Source P03 · p.21 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WRP20C ↗
SUITABLE EXCAVATOR,T
20-30
CYLINDER OIL FLOW,L/MIN
180-240
MOTOR OIL FLOW,L/MIN
30-50
Source P03 · p.21 ↗
All parameters and conditions ↗
Download reference · CSV ↗

Fixed Pulverizers ↗

Model-specific source values · original fields and units retained
Complete modelSource specification snapshotDetails & download
WFP08 ↗
SUITABLE EXCAVATOR,T
7-10
OIL FLOW,L/MIN
60-120
MAX. OPENING WIDTH,MM
620
Source P03 · p.22 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WFP15 ↗
SUITABLE EXCAVATOR,T
11-17
OIL FLOW,L/MIN
140-240
MAX. OPENING WIDTH,MM
750
Source P03 · p.22 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WFP20 ↗
SUITABLE EXCAVATOR,T
18-27
OIL FLOW,L/MIN
180-240
MAX. OPENING WIDTH,MM
850
Source P03 · p.22 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WFP20I ↗
SUITABLE EXCAVATOR,T
18-27
OIL FLOW,L/MIN
180-240
MAX. OPENING WIDTH,MM
760
Source P03 · p.22 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WFP30 ↗
SUITABLE EXCAVATOR,T
28-45
OIL FLOW,L/MIN
200-250
MAX. OPENING WIDTH,MM
1150
Source P03 · p.22 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WFP30C ↗
SUITABLE EXCAVATOR,T
28-45
OIL FLOW,L/MIN
200-250
MAX. OPENING WIDTH,MM
1085
Source P03 · p.22 ↗
All parameters and conditions ↗
Download reference · CSV ↗

Pulverizers with Magnet ↗

Model-specific source values · original fields and units retained
Complete modelSource specification snapshotDetails & download
WMP20-M ↗
SUITABLE EXCAVATOR, T
18-27
OIL FLOW RANGE, L/MIN
180-240
MAX. OPENING WIDTH, MM
760
Source P03 · p.23 ↗
All parameters and conditions ↗
Download reference · CSV ↗

Scrap Grapples ↗

Model-specific source values · original fields and units retained
Complete modelSource specification snapshotDetails & download
WGWS08 ↗
SUITABLE EXCAVATOR,T
5-10
OPERATION FLOW(GRAB),L/MIN
90-110
MOTOR OIL FLOW,L/MIN
30-50
Source P03 · p.27 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WGWS15 ↗
SUITABLE EXCAVATOR,T
11-16
OPERATION FLOW(GRAB),L/MIN
90-110
MOTOR OIL FLOW,L/MIN
30-50
Source P03 · p.27 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WGWS20 ↗
SUITABLE EXCAVATOR,T
17-40
OPERATION FLOW(GRAB),L/MIN
120-200
MOTOR OIL FLOW,L/MIN
40-60
Source P03 · p.27 ↗
All parameters and conditions ↗
Download reference · CSV ↗

Orange Peel Grapples ↗

Model-specific source values · original fields and units retained
Complete modelSource specification snapshotDetails & download
WOG15 ↗
SUITABLE EXCAVATOR, T
12-16
CYLINDER OIL FLOW,L/MIN
80-120
MOTOR OIL FLOW,L/MIN
30-50
Source P03 · p.29 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WOG15H ↗
SUITABLE EXCAVATOR, T
12-16
CYLINDER OIL FLOW,L/MIN
80-120
MOTOR OIL FLOW,L/MIN
30-50
Source P03 · p.29 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WOG20 ↗
SUITABLE EXCAVATOR, T
17-24
CYLINDER OIL FLOW,L/MIN
100-140
MOTOR OIL FLOW,L/MIN
30-50
Source P03 · p.29 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WOG20H ↗
SUITABLE EXCAVATOR, T
17-24
CYLINDER OIL FLOW,L/MIN
100-140
MOTOR OIL FLOW,L/MIN
30-50
Source P03 · p.29 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WOG30 ↗
SUITABLE EXCAVATOR, T
25-35
CYLINDER OIL FLOW,L/MIN
130-180
MOTOR OIL FLOW,L/MIN
30-50
Source P03 · p.29 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WOG30H ↗
SUITABLE EXCAVATOR, T
25-35
CYLINDER OIL FLOW,L/MIN
130-180
MOTOR OIL FLOW,L/MIN
30-50
Source P03 · p.29 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WOG15P ↗
SUITABLE EXCAVATOR, T
12-16
CYLINDER OIL FLOW,L/MIN
100-140
MOTOR OIL FLOW,L/MIN
30-50
Source P03 · p.29 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WOG15PH ↗
SUITABLE EXCAVATOR, T
12-16
CYLINDER OIL FLOW,L/MIN
100-140
MOTOR OIL FLOW,L/MIN
30-50
Source P03 · p.29 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WOG20P ↗
SUITABLE EXCAVATOR, T
17-24
CYLINDER OIL FLOW,L/MIN
130-180
MOTOR OIL FLOW,L/MIN
30-50
Source P03 · p.29 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WOG20PH ↗
SUITABLE EXCAVATOR, T
17-24
CYLINDER OIL FLOW,L/MIN
130-180
MOTOR OIL FLOW,L/MIN
30-50
Source P03 · p.29 ↗
All parameters and conditions ↗
Download reference · CSV ↗

Crushing Buckets ↗

Model-specific source values · original fields and units retained
Complete modelSource specification snapshotDetails & download
WBC20 ↗
SUITABLE EXCAVATOR,T
20-30
RECOMMENDED FLOW RATE,L/MIN
220
INLET OPENING SIZE,MM
850×430
Source P03 · p.34 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WBC30 ↗
SUITABLE EXCAVATOR,T
25-35
RECOMMENDED FLOW RATE,L/MIN
240
INLET OPENING SIZE,MM
910×540
Source P03 · p.34 ↗
All parameters and conditions ↗
Download reference · CSV ↗

Screening Buckets ↗

Model-specific source values · original fields and units retained
Complete modelSource specification snapshotDetails & download
WSB15 ↗
SUITABLE EXCAVATOR,T
10-15
RECOMMENDED FLOW RATE,L/MIN
70
DRUM DIAMETER,MM
1000
Source P03 · p.35 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WSB20 ↗
SUITABLE EXCAVATOR,T
15-20
RECOMMENDED FLOW RATE,L/MIN
70
DRUM DIAMETER,MM
1160
Source P03 · p.35 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WSB30 ↗
SUITABLE EXCAVATOR,T
22-28
RECOMMENDED FLOW RATE,L/MIN
70
DRUM DIAMETER,MM
1320
Source P03 · p.35 ↗
All parameters and conditions ↗
Download reference · CSV ↗

Car Dismantling Pressing Frames ↗

Model-specific source values · original fields and units retained
Complete modelSource specification snapshotDetails & download
WCA20D ↗
SUITABLE EXCAVATOR,T
18-27
OIL FLOW RANGE(CLAMPING), L/MIN
80-120
OIL FLOW RANGE(LIFTING), L/MIN
30-50
Source P03 · p.37 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WCA20S ↗
SUITABLE EXCAVATOR,T
18-27
OIL FLOW RANGE(CLAMPING), L/MIN
80-120
OIL FLOW RANGE(LIFTING), L/MIN
/
Source P03 · p.37 ↗
All parameters and conditions ↗
Download reference · CSV ↗

Medium-duty Hydraulic Breakers ↗

Model-specific source values · original fields and units retained
Complete modelSource specification snapshotDetails & download
WHB125 ↗
SUITABLE EXCAVATOR, T
15-18
OIL FLOW RANGE, L/MIN
90-120
DIAMETER OF HOSE, INCH
1
Source P03 · p.44 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WHB135 ↗
SUITABLE EXCAVATOR, T
18-26
OIL FLOW RANGE, L/MIN
130-150
DIAMETER OF HOSE, INCH
1
Source P03 · p.44 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WHB135F ↗
SUITABLE EXCAVATOR, T
18-26
OIL FLOW RANGE, L/MIN
145-180
DIAMETER OF HOSE, INCH
1
Source P03 · p.44 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WHB135M ↗
SUITABLE EXCAVATOR, T
18-26
OIL FLOW RANGE, L/MIN
115-160
DIAMETER OF HOSE, INCH
1
Source P03 · p.44 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WHB140 ↗
SUITABLE EXCAVATOR, T
18-26
OIL FLOW RANGE, L/MIN
120-180
DIAMETER OF HOSE, INCH
1
Source P03 · p.45 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WHB140A ↗
SUITABLE EXCAVATOR, T
18-26
OIL FLOW RANGE, L/MIN
120-180
DIAMETER OF HOSE, INCH
1
Source P03 · p.45 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WHB150 ↗
SUITABLE EXCAVATOR, T
27-35
OIL FLOW RANGE, L/MIN
150-190
DIAMETER OF HOSE, INCH
1
Source P03 · p.45 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WHB155 ↗
SUITABLE EXCAVATOR, T
28-35
OIL FLOW RANGE, L/MIN
180-240
DIAMETER OF HOSE, INCH
11/4
Source P03 · p.45 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WHB165 ↗
SUITABLE EXCAVATOR, T
35-40
OIL FLOW RANGE, L/MIN
200-250
DIAMETER OF HOSE, INCH
11/4
Source P03 · p.45 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WHB160 ↗
SUITABLE EXCAVATOR, T
35-40
OIL FLOW RANGE, L/MIN
190-240
DIAMETER OF HOSE, INCH
11/4
Source P03 · p.45 ↗
All parameters and conditions ↗
Download reference · CSV ↗

Fully Hydraulic Breakers ↗

Model-specific source values · original fields and units retained
Complete modelSource specification snapshotDetails & download
WHB100Y ↗
SUITABLE EXCAVATOR, T
10-15
HYDRAULIC FLOW RANGE, L/MIN
70-100
DIAMETER OF HOSE, MM
19.05
Source P03 · p.48 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WHB120Y ↗
SUITABLE EXCAVATOR, T
14-26
HYDRAULIC FLOW RANGE, L/MIN
100-170
DIAMETER OF HOSE, MM
25.47
Source P03 · p.48 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WHB135Y ↗
SUITABLE EXCAVATOR, T
20-30
HYDRAULIC FLOW RANGE, L/MIN
120-180
DIAMETER OF HOSE, MM
25.4
Source P03 · p.48 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WHB150Y ↗
SUITABLE EXCAVATOR, T
25-40
HYDRAULIC FLOW RANGE, L/MIN
160-230
DIAMETER OF HOSE, MM
25.4
Source P03 · p.48 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WHB160Y ↗
SUITABLE EXCAVATOR, T
30-50
HYDRAULIC FLOW RANGE, L/MIN
180-270
DIAMETER OF HOSE, MM
31.75
Source P03 · p.48 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WHB170Y ↗
SUITABLE EXCAVATOR, T
36-55
HYDRAULIC FLOW RANGE, L/MIN
250-350
DIAMETER OF HOSE, MM
31.75
Source P03 · p.48 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WHB190Y ↗
SUITABLE EXCAVATOR, T
45-80
HYDRAULIC FLOW RANGE, L/MIN
280-380
DIAMETER OF HOSE, MM
31.75
Source P03 · p.48 ↗
All parameters and conditions ↗
Download reference · CSV ↗

Automatic Grease Devices ↗

Model-specific source values · original fields and units retained
Complete modelSource specification snapshotDetails & download
AGD-H2 ↗
OUTPUT PRESSURE,BAR
18-164
WEIGHT WITHOUT GREASE,KG
3.9
CARTRIDGE CAPACITY,ML
400
Source P03 · p.51 ↗
All parameters and conditions ↗
Download reference · CSV ↗
AGD-Z5 ↗
OUTPUT PRESSURE,BAR
20-60
WEIGHT WITHOUT GREASE,KG
3.9
CARTRIDGE CAPACITY,ML
500
Source P03 · p.51 ↗
All parameters and conditions ↗
Download reference · CSV ↗

Selection and purchase guidance

Quick coupler types and configuration review · supplied family image; exact model not identified

Quick coupler types and configuration review

The supplied WHC, WCQ, WDQ, WSQ, WTD, WTS and WRQ pages distinguish hydraulic, cast, double-lock, tilting and rotating types. Rotation and tilt are different functions; a rotating quick coupler is not automatically a tiltrotator.

Explore ↗
How to prepare quick coupler measurements · supplied family image; exact model not identified

How to prepare quick coupler measurements

The pre-order form identifies front and rear pin diameters A1/A2, centre distance B and widths C1/C2. Record what each width measures, include units and attach labelled photographs or a drawing.

Explore ↗
Choose a grapple by material and handling task · supplied family image; exact model not identified

Choose a grapple by material and handling task

Separate wood/stone, logs, scrap and loose bulk material. Describe piece shape, size, density and handling method rather than selecting from the product photograph alone.

Explore ↗
Hydraulic breaker selection and order inputs · supplied family image; exact model not identified

Hydraulic breaker selection and order inputs

The supplied material separates light, medium, heavy and fully hydraulic breaker references and side/top/box dimensions. Compare the same housing, bracket and tool arrangement.

Explore ↗
Steel shear, crusher or pulverizer: define the task · supplied family image; exact model not identified

Steel shear, crusher or pulverizer: define the task

The supplied catalogue separates steel shears, eagle shears, CR/CC crushers, dismantling shears, fixed/rotating pulverizers and a magnet-equipped type. State the material and desired processing result.

Explore ↗
Bucket selection: task, material and interface · supplied family image; exact model not identified

Bucket selection: task, material and interface

Crushing, screening, clamshell handling, cleaning and digging are different tasks. Supplied image families also include tilt, rock and multi-purpose configurations.

Explore ↗
Drum cutter application and data request · supplied family image; exact model not identified

Drum cutter application and data request

Describe material, cut dimensions, access, machine and site arrangement. The supplied display images do not establish cutting performance.

Explore ↗
What to include in an attachment quotation request · supplied family image; exact model not identified

What to include in an attachment quotation request

The supplied order process covers customer identity, machine brand/model/year, installation dimensions/oil ports, working conditions, function/specification and a completeness check.

Explore ↗
Machine and attachment compatibility information · supplied family image; exact model not identified

Machine and attachment compatibility information

Provide exact brand, model and year, working weight and available machine documents. Add serial information when needed for configuration review.

Explore ↗
How to request the correct spare or wear part · supplied family image; exact model not identified

How to request the correct spare or wear part

Provide model/suffix, serial or order reference, part number if known and the current drawing revision.

Explore ↗
Read the quick coupler warranty by component · supplied family image; exact model not identified

Read the quick coupler warranty by component

The supplied quick-coupler matrix distinguishes body, hydraulic lock, cylinder, valve, pins, hoses and switch. Standard and rotating arrangements have different conditions.

Explore ↗
Rotating vs tilting couplers: choose the movement you need · supplied family image; exact model not identified

Rotating vs tilting couplers: choose the movement you need

A rotary coupler changes the tool orientation through the 360-degree rotation described in the R-series source. A tilting coupler changes the tool angle within its model-specific tilt range. These are different motions; neither label alone establishes a tiltrotator.

Explore ↗
Crushing vs screening buckets: separate the process · supplied family image; exact model not identified

Crushing vs screening buckets: separate the process

The supplied crushing-bucket page describes breaking feed material on site. The screening-bucket page describes separating material by a screen arrangement. Size reduction and separation are different process requirements.

Explore ↗
Fixed vs rotating pulverizers: task and positioning review · supplied family image; exact model not identified

Fixed vs rotating pulverizers: task and positioning review

Describe the concrete pieces, reinforcement and processing stage before selecting the jaw and opening. The supplied catalogue separates fixed, rotating and magnet-equipped pulverizer configurations.

Explore ↗
Connect breaking, concrete processing, cutting and sorting · supplied family image; exact model not identified

Connect breaking, concrete processing, cutting and sorting

The supplied range distinguishes breaking, concrete processing, steel cutting, vehicle dismantling and sorting/handling. Identify the material and required result of each stage.

Explore ↗

Source and document traceability

Catalogue transcription for preliminary review. Confirm the applicable configuration and current approved revision before order.

CONTINUE YOUR REVIEW

Related information for your next decision

Discuss your machine, application and configuration →

What do you need to do?

Start with part of a model or describe the job. Suggested results are for selection review.