FROM AN IDEA TO A REQUIREMENT
What to specify for this attachment
Use these decisions to turn the work requirement into a model and configuration enquiry.
| Decision | Why it matters | Information to provide |
|---|---|---|
| Applicable attachment | An accessory must be identified against the installed product. | Full model/suffix, installation and part/drawing identity. |
| Connections and conditions | Ports, medium and service conditions must match the configuration. | Connection details, operating conditions and requested documents. |
| Revision and maintenance | A visually similar item is not enough to confirm interchangeability. | Current revision, part reference and the required service information. |
Structure and functions in the supplied material
The supplied table separates cartridge capacity, exterior size, outlet connection, grease and temperature conditions.
Models and parameter comparison
| Parameter | AGD-H2 ↗ | AGD-Z5 ↗ |
|---|---|---|
| OUTPUT PRESSURE,BAR | 18-164 | 20-60 |
| CARTRIDGE CAPACITY,ML | 400 | 500 |
| EXTERIOR SIZE,MM | 165*88*252 | 140*91*320 |
| WEIGHT WITHOUT GREASE,KG | 3.9 | 3.9 |
| OUTPUT PORT SIZE | PF1/4 | PF1/4 |
| RUNNING TIME OF CARTRIDGE (NORMAL CONDITION) | As printed: 500CC/100CC 1HOUR → 1 OR 2 CARTRIDGES 1 DAY; 0CC/22CC 1HOUR → 1 CARTRIDGE 3-5 DAYS. Catalogue examples; dosing notation and applicability require confirmation. | 20 TONS EXCAVATOR → 3-4 DAYS; 40 TONS EXCAVATOR → 1-2 DAYS. Catalogue examples, not a universal service interval. |
| GREASE TYPE | PLEASE USE BELOW 200CST VISCOSITY GREASE | MOS2 NLGI NO.2(NORMAL) NLGI NO.1(UNDER10℃) NLGI NO.0(UNDER10℃) |
| NORMAL TEMPERATURE RANGE | -10℃-70℃ | -10℃-60℃ |
| PERMISSIBLE TEMPERATURE RANGE | -10℃-70℃ | -10℃-60℃ |
Tasks, applications and buyer value
Compare output pressure, cartridge and grease requirements against the actual installation and duty.
Selection inputs and applicable conditions
Parent breaker; device drive; output connection; grease type; temperature and duty.
Brochure cartridge running-time examples are not a universal maintenance interval; installation and grease requirements remain device/model-specific.
Plan the work around the attachment
Describe the task
Provide the work stage, material, access and required result. Keep those conditions with the model comparison.
Match the machine and attachment
Confirm machine identity, mounting dimensions, attachment mass and relevant hydraulic information against the documented model data.
Keep the technical package together
Request the installation and operating information, wear parts and applicable inspection documents for the exact proposed configuration.
Available information and source documents
The supplied family material supports this type entry. Complete order configuration, current drawing and applicable operation documents remain part of the model review.
Selection and purchase guidance
Where this tool fits in the work.
Questions specific to this type
What should I compare before choosing Automatic Grease Devices?
Parent breaker; device drive; output connection; grease type; temperature and duty.
Which limits remain important for the purchase?
Brochure cartridge running-time examples are not a universal maintenance interval; installation and grease requirements remain device/model-specific.
