FROM AN IDEA TO A REQUIREMENT
What to specify for this attachment
Use these decisions to turn the work requirement into a model and configuration enquiry.
| Decision | Why it matters | Information to provide |
|---|---|---|
| Task and contact geometry | Digging, cleaning, grading, gripping, crushing and screening are different work stages. | The job and required surface, opening or output fraction. |
| Material and capacity definition | Width or nominal volume alone does not describe the working load. | Material size, density/moisture and width/capacity requirements. |
| Edge, teeth or process parts | Wear and working parts depend on the selected bucket arrangement. | Required edge/teeth, screen or crushing configuration. |
| Machine and powered functions | The mounting and any powered movement must be reviewed with the machine. | Carrier, connection dimensions and hydraulic information where applicable. |
View the supplied catalogue drawing and original technical page
Supplier-provided catalogue reference · P03 physical page 34. Check the exact model header, configuration and source version. This excerpt is not a substitute for the current approved installation drawing or a model-specific test report.

Catalogue specifications and source
| Field | Catalogue reference | Source physical page |
|---|---|---|
| Model | WBC20 | P03 · p.34 ↗ |
| WEIGHT,KG | 3150 | P03 · p.34 ↗ |
| INLET OPENING SIZE,MM | 850×430 | P03 · p.34 ↗ |
| BUCKET CAPACITY, M 3 | 0.7 | P03 · p.34 ↗ |
| WORKING PRESSURE,BAR | 230 | P03 · p.34 ↗ |
| RECOMMENDED FLOW RATE,L/MIN | 220 | P03 · p.34 ↗ |
| SUITABLE EXCAVATOR,T | 20-30 | P03 · p.34 ↗ |
Drawing letters such as A/B refer to the original drawing keys; verify dimensions and units with the current model drawing.
Purpose and task
WBC20 is the crushing bucket reference for on-site material size reduction. Reduce suitable material at the excavator with the WBC crushing-bucket range.
How this helps your buying decision
State feed material, largest pieces, reinforcement/contamination and desired output. Check inlet geometry, access, mounting and the carrier circuit. Compare WBC20 with WBC30 as separate source-listed configurations. For INLET OPENING SIZE,MM, the listed values are 850×430 (WBC20) and 910×540 (WBC30). For WEIGHT,KG, the listed values are 3150 (WBC20) and 3600 (WBC30). Keep units, mounting position, circuit labels and document conditions with each value. Similar model numbers or overlapping carrier references do not prove fitment, interchangeability or a better result for your task.
Model and configuration
The model-specific source row states: WEIGHT,KG: 3150; INLET OPENING SIZE,MM: 850×430; BUCKET CAPACITY, M 3: 0.7; WORKING PRESSURE,BAR: 230; RECOMMENDED FLOW RATE,L/MIN: 220; SUITABLE EXCAVATOR,T: 20-30. Retain the printed units, dimension keys and applicable circuit or mounting labels; unknown drawing units require confirmation rather than conversion.
Machine and interface review
State feed material, largest pieces, reinforcement/contamination and desired output. Check inlet geometry, access, mounting and the carrier circuit. Check mounting pins, centres, inside width, overall envelope and clearance through the intended movement against the actual assembly drawing. Catalogue carrier references are preliminary selection information, not machine-specific approval.
Installation, control and operating conditions
The source lists WORKING PRESSURE,BAR: 230; RECOMMENDED FLOW RATE,L/MIN: 220. Check the actual machine flow/pressure at the intended settings, control/valve arrangement, hose/coupling dimensions, return/back-pressure and any case-drain requirement against the current hydraulic drawing. Separate catalogue ranges or maxima do not establish one approved simultaneous running point. Inlet opening in mm and bucket capacity in m³ describe different things. Neither establishes tonnes/hour for unspecified feed or confirms the allowed reinforcement and material strength.
Structure and differences
The illustrated WBC bucket has a material inlet and an internal crushing arrangement within the bucket body. The model table lists inlet opening, attachment mass and hydraulic input. Compare input material and intended output together, and keep material exclusions and operating limits with the selected configuration. Inlet opening in mm and bucket capacity in m³ describe different things. Neither establishes tonnes/hour for unspecified feed or confirms the allowed reinforcement and material strength.
Application boundaries
A source output figure is not a guaranteed rate for unspecified feed, moisture, reinforcement or material strength. Confirm permitted feed and duty with the actual technical package.
Manufacturing and quality responsibility
WE-ATTACH supports attachment selection, configuration requirements and coordinated supply through core manufacturing partners, with a warehouse and hillside testing site. Keep the actual manufacturer, ordered model and applicable scope with inspection, material or compliance records. A partner facility certificate or catalogue image is not model-specific product approval.
Documents, parts and operation
Use P03 physical PDF page 34 and the model-reference CSV linked on this page. Each exported parameter retains its source ID and physical page. Catalogue sketches, source images and selection tables are reference information; request the current mounting/connection drawing, operating and maintenance instructions and model-specific evidence for the actual ordered configuration.
Options and scope of supply
Confirm permitted feed, output adjustment, crushing wear parts, hydraulic connections and maintenance access. Have the quotation identify the attachment, mounting, controls/connections, included accessories and required parts individually. A pictured option, support frame or related tool is not automatically included.
Information to send with a WBC20 enquiry
For WBC20, send machine make/model and operating weight; mounting/linkage dimensions; available circuit and return information where applicable; material, work stage, access/reach and desired result; Feed material/size; desired output; circuit; machine; site space and handling sequence. Include quantity, destination and any drawings/photos. State units and identify unknown values rather than substituting a similar machine or model.
Before confirming the order
Agree the complete model and suffix, actual machine, interfaces, operating conditions and scope of supply. Keep unresolved source descriptions and accepted drawing/document revisions with the quotation. Confirm inspection/document requirements, price, delivery, warranty and service scope for the actual order; no unverified term or performance commitment is added here.
Source and document traceability
Catalogue transcription for preliminary review. Confirm the applicable configuration and current approved revision before order.
- Excavator Attachment Catalogue ↗ · PDF physical page 34
Applications and working conditions
Selection and purchase guides
Questions before selection
What task does WBC20 address?
WBC20 is the crushing bucket reference for on-site material size reduction. Reduce suitable material at the excavator with the WBC crushing-bucket range.
Which information should accompany a WBC20 enquiry?
For WBC20, send machine make/model and operating weight; mounting/linkage dimensions; available circuit and return information where applicable; material, work stage, access/reach and desired result; Feed material/size; desired output; circuit; machine; site space and handling sequence. Include quantity, destination and any drawings/photos. State units and identify unknown values rather than substituting a similar machine or model.
What must be checked before confirming this configuration?
A source output figure is not a guaranteed rate for unspecified feed, moisture, reinforcement or material strength. Confirm permitted feed and duty with the actual technical package.
How should I compare WBC20 with another configuration?
Compare WBC20 with WBC30 as separate source-listed configurations. For INLET OPENING SIZE,MM, the listed values are 850×430 (WBC20) and 910×540 (WBC30). For WEIGHT,KG, the listed values are 3150 (WBC20) and 3600 (WBC30). Keep units, mounting position, circuit labels and document conditions with each value. Similar model numbers or overlapping carrier references do not prove fitment, interchangeability or a better result for your task. Inlet opening in mm and bucket capacity in m³ describe different things. Neither establishes tonnes/hour for unspecified feed or confirms the allowed reinforcement and material strength.
What installation and operating information is needed for WBC20?
State feed material, largest pieces, reinforcement/contamination and desired output. Check inlet geometry, access, mounting and the carrier circuit. The source lists WORKING PRESSURE,BAR: 230; RECOMMENDED FLOW RATE,L/MIN: 220. Check the actual machine flow/pressure at the intended settings, control/valve arrangement, hose/coupling dimensions, return/back-pressure and any case-drain requirement against the current hydraulic drawing. Separate catalogue ranges or maxima do not establish one approved simultaneous running point.
Where can I check the source and current documents for WBC20?
Use P03 physical PDF page 34 and the model-reference CSV linked on this page. Each exported parameter retains its source ID and physical page. Catalogue sketches, source images and selection tables are reference information; request the current mounting/connection drawing, operating and maintenance instructions and model-specific evidence for the actual ordered configuration.
Which parts and options should the WBC20 quotation identify?
Confirm permitted feed, output adjustment, crushing wear parts, hydraulic connections and maintenance access. Confirm the exact configuration and each included item rather than using a family illustration as a packing list.
Related model references
Product type and related work stages
Screening Buckets
Separate material by size using the WSB rotating screening-bucket range and the specified screen opening.
3 listed modelsView type, details & selection →Heavy-duty Hydraulic Breakers
Review heavy-duty WHB breaker models for the machine capacity and proposed breaking conditions.
11 listed modelsView type, details & selection →Clamshell Buckets
Excavate and transfer material with the opening-and-closing clamshell bucket arrangement.
2 listed modelsView type, details & selection →Rippers
Loosen resistant ground or material with the WR single-shank excavator-ripper range.
7 listed modelsView type, details & selection →Heavy-duty Rock Buckets
Excavate rock-bearing material with the supplied reinforced rock-bucket form.
Specify your configurationView type, details & selection →