Excavator attachment supply · Ningbo, China Search · FAQ · Support · Market / EnglishWhatsApp +86 15058273161
WE-ATTACH

WE-ATTACH / EXCAVATOR ATTACHMENTS

Municipal & Road Works

Road and utility work often combines several stages: localized breaking, trench cleaning, surface finishing and backfill compaction. Define the work area and conditions for each tool.

Explore the work stages

START WITH THE WORK

Plan the breaking, trench and backfill sequence.

01

Break the defined work area

State pavement/material, access and working duty. Review the breaker, bracket/tool and machine circuit for the proposed task rather than assuming a road application establishes fitment.

Explore this work scenario
02

Clean and shape the trench

Give working width, ditch/slope profile, reach and clearance. Separate fixed cleaning geometry from the need to tilt a tool, then confirm mounting and any auxiliary circuit.

Explore this work scenario
03

Compact the placed fill

Provide fill description, access and plate dimensions with the carrier and hydraulic/return data. Compaction conditions belong with the proposal; the catalogue is not a site acceptance record.

Explore this work scenario
04

Keep the tool-change record

Where several tools share a machine, retain the actual interface measurements, locking method, circuits and relevant documents for each configuration.

Explore this work scenario

The material and work stage

Road and utility work often combines several stages: localized breaking, trench cleaning, surface finishing and backfill compaction. Define the work area and conditions for each tool.

Information for the configuration review

Pavement/material and work area; access; trench/working geometry; machine/circuit; installation and operation documents.

Documents to keep with the proposal

Keep the complete model/suffix, machine and mounting information with the relevant drawing and operating requirements. The work stages above identify the product and document paths for this application.

Application scope

These are selection pathways drawn from the supplied product material. Confirm the exact configuration and site conditions; no customer project or measured site result is represented by the product photographs.

Start with the relevant attachment family

Model references and source specifications for this industry

Hydraulic Quick Couplers ↗

Model-specific source values · original fields and units retained
Complete modelSource specification snapshotDetails & download
WHC01 ↗
SUITABLE CARRIER,T
1-2
OIL FLOW RANGE,L/MIN
10-30
PIN DIAMETER(ØD),MM
Ø25-Ø30
Source P03 · p.6 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WHC02 ↗
SUITABLE CARRIER,T
2.5-4
OIL FLOW RANGE,L/MIN
10-30
PIN DIAMETER(ØD),MM
Ø30-Ø40
Source P03 · p.6 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WHC03 ↗
SUITABLE CARRIER,T
5-6
OIL FLOW RANGE,L/MIN
10-30
PIN DIAMETER(ØD),MM
Ø40-Ø50
Source P03 · p.6 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WHC04 ↗
SUITABLE CARRIER,T
7-10
OIL FLOW RANGE,L/MIN
10-30
PIN DIAMETER(ØD),MM
Ø50-Ø60
Source P03 · p.6 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WHC06 ↗
SUITABLE CARRIER,T
11-17
OIL FLOW RANGE,L/MIN
10-30
PIN DIAMETER(ØD),MM
Ø60-Ø70
Source P03 · p.6 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WHC08 ↗
SUITABLE CARRIER,T
18-25
OIL FLOW RANGE,L/MIN
10-30
PIN DIAMETER(ØD),MM
Ø80-Ø90
Source P03 · p.6 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WHC10 ↗
SUITABLE CARRIER,T
25-36
OIL FLOW RANGE,L/MIN
10-30
PIN DIAMETER(ØD),MM
Ø90-Ø100
Source P03 · p.6 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WHC14 ↗
SUITABLE CARRIER,T
36-45
OIL FLOW RANGE,L/MIN
10-30
PIN DIAMETER(ØD),MM
Ø100-Ø110
Source P03 · p.6 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WHC17 ↗
SUITABLE CARRIER,T
45-55
OIL FLOW RANGE,L/MIN
10-30
PIN DIAMETER(ØD),MM
Ø110-Ø130
Source P03 · p.6 ↗
All parameters and conditions ↗
Download reference · CSV ↗

Vibratory Compactors ↗

Model-specific source values · original fields and units retained
Complete modelSource specification snapshotDetails & download
WVC02 ↗
SUITABLE EXCAVATOR,T
1-3
OIL FLOW RANGE,L/MIN
30-50
WORKING PRESSURE,BAR
40-100
Source P03 · p.32 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WVC04 ↗
SUITABLE EXCAVATOR,T
4-6
OIL FLOW RANGE,L/MIN
50-70
WORKING PRESSURE,BAR
80-120
Source P03 · p.32 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WVC08 ↗
SUITABLE EXCAVATOR,T
7-10
OIL FLOW RANGE,L/MIN
60-80
WORKING PRESSURE,BAR
90-130
Source P03 · p.32 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WVC15 ↗
SUITABLE EXCAVATOR,T
11-16
OIL FLOW RANGE,L/MIN
80-120
WORKING PRESSURE,BAR
100-140
Source P03 · p.32 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WVC20 ↗
SUITABLE EXCAVATOR,T
17-23
OIL FLOW RANGE,L/MIN
100-170
WORKING PRESSURE,BAR
150-180
Source P03 · p.32 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WVC30 ↗
SUITABLE EXCAVATOR,T
24-35
OIL FLOW RANGE,L/MIN
120-210
WORKING PRESSURE,BAR
150-180
Source P03 · p.32 ↗
All parameters and conditions ↗
Download reference · CSV ↗

Upgraded Vibratory Compactors ↗

Model-specific source values · original fields and units retained
Complete modelSource specification snapshotDetails & download
WEC04 ↗
SUITABLE EXCAVATOR,T
1-5
OIL FLOW RANGE,L/MIN
50-70
WORKING PRESSURE,BAR
80-120
Source P03 · p.33 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WEC06 ↗
SUITABLE EXCAVATOR,T
6-10
OIL FLOW RANGE,L/MIN
60-80
WORKING PRESSURE,BAR
90-130
Source P03 · p.33 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WEC15 ↗
SUITABLE EXCAVATOR,T
11-16
OIL FLOW RANGE,L/MIN
80-120
WORKING PRESSURE,BAR
100-140
Source P03 · p.33 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WEC20 ↗
SUITABLE EXCAVATOR,T
17-23
OIL FLOW RANGE,L/MIN
100-170
WORKING PRESSURE,BAR
150-180
Source P03 · p.33 ↗
All parameters and conditions ↗
Download reference · CSV ↗

Tilt Buckets ↗

Model-specific source values · original fields and units retained
Complete modelSource specification snapshotDetails & download
WTB01 ↗
SUITABLE EXCAVATOR,T
2-4
TILT OIL FLOW, L/MIN
13-18
MAX. OPERATINGPRESSURE, BAR
230
Source P03 · p.39 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WTB02 ↗
SUITABLE EXCAVATOR,T
5-6
TILT OIL FLOW, L/MIN
15-20
MAX. OPERATINGPRESSURE, BAR
230
Source P03 · p.39 ↗
All parameters and conditions ↗
Download reference · CSV ↗

Light-duty Hydraulic Breakers ↗

Model-specific source values · original fields and units retained
Complete modelSource specification snapshotDetails & download
WHB35 ↗
SUITABLE EXCAVATOR, T
0.4-2
OIL FLOW RANGE, L/MIN
12-20
DIAMETER OF HOSE, INCH
1/2
Source P03 · p.42 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WHB40 ↗
SUITABLE EXCAVATOR, T
0.8-2.5
OIL FLOW RANGE, L/MIN
15-25
DIAMETER OF HOSE, INCH
1/2
Source P03 · p.42 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WHB45 ↗
SUITABLE EXCAVATOR, T
1.2-3.0
OIL FLOW RANGE, L/MIN
20-30
DIAMETER OF HOSE, INCH
1/2
Source P03 · p.42 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WHB53 ↗
SUITABLE EXCAVATOR, T
2.5-4.5
OIL FLOW RANGE, L/MIN
25-50
DIAMETER OF HOSE, INCH
1/2
Source P03 · p.42 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WHB60 ↗
SUITABLE EXCAVATOR, T
4-6
OIL FLOW RANGE, L/MIN
30-60
DIAMETER OF HOSE, INCH
1/2
Source P03 · p.43 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WHB68 ↗
SUITABLE EXCAVATOR, T
4-7
OIL FLOW RANGE, L/MIN
40-70
DIAMETER OF HOSE, INCH
1/2
Source P03 · p.43 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WHB75 ↗
SUITABLE EXCAVATOR, T
6-9
OIL FLOW RANGE, L/MIN
50-90
DIAMETER OF HOSE, INCH
1/2
Source P03 · p.43 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WHB75/80 ↗
SUITABLE EXCAVATOR, T
6-9
OIL FLOW RANGE, L/MIN
50-90
DIAMETER OF HOSE, INCH
1/2
Source P03 · p.43 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WHB85 ↗
SUITABLE EXCAVATOR, T
7-14
OIL FLOW RANGE, L/MIN
60-100
DIAMETER OF HOSE, INCH
3/4
Source P03 · p.43 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WHB100 ↗
SUITABLE EXCAVATOR, T
10-15
OIL FLOW RANGE, L/MIN
80-110
DIAMETER OF HOSE, INCH
3/4
Source P03 · p.43 ↗
All parameters and conditions ↗
Download reference · CSV ↗

Selection and purchase guidance

Source and document traceability

Catalogue transcription for preliminary review. Confirm the applicable configuration and current approved revision before order.

CONTINUE YOUR REVIEW

Related information for your next decision

Discuss your machine, application and configuration →

What do you need to do?

Start with part of a model or describe the job. Suggested results are for selection review.