FROM AN IDEA TO A REQUIREMENT
What to specify for this attachment
Use these decisions to turn the work requirement into a model and configuration enquiry.
| Decision | Why it matters | Information to provide |
|---|---|---|
| Required movement | Changing a tool, tilting it and rotating it are separate functions. | The intended tool and movement, with the required angle/clearance. |
| Upper and lower interfaces | A model name or machine class does not define the complete connection. | Machine identity, pin diameter, centres, inside width and existing tool interface. |
| Hydraulic connections | Locking, rotation or tilt may have separate requirements from the connected tool. | Available circuits, flow, pressure, return and required hose arrangement. |
| Installation information | The final arrangement must retain the applicable locking and operating information. | Current mounting drawing, full model/suffix and the intended attachment. |
Structure and functions in the supplied material
The supplied R-series page identifies 360-degree rotation, a high-flow swivel joint, a gearbox drive and a steel/copper composite turbine. Rotation-motor and coupling-cylinder circuits have separate rows.
Models and parameter comparison
| Parameter | WRQ02 ↗ | WRQ4 ↗ | WRQ06 ↗ |
|---|---|---|---|
| LENGTH(L),MM | 527 | 650 | 827 |
| HEIGHT(H),MM | 296 | 340 | 492 |
| WIDTH(W),MM | 373 | 405 | 545 |
| OUTER OPENING GAP(W1),MM | 200 | 224 | 350 |
| LOWER OPENING GAP(W2),MM | 135 | 154 | 257 |
| WHEELBASE(L1),MM | 212 | 295 | 399 |
| HEIGHT DIFFERENCE(H1),MM | 251 | 285 | 368 |
| OPERATING FLOW(MOTOR),L/MIN | 40-50 | 60-70 | 60-70 |
| WORKING PRESSURE(MOTOR),BAR | 140-160 | 140-160 | 140-160 |
| OPERATING FLOW(CYLINDER),L/MIN | 10-30 | 10-30 | 10-30 |
| WORKING PRESSURE(CYLINDER),BAR | 30-250 | 30-250 | 30-250 |
| WEIGHT,KG | 110 | 145 | 375 |
| SUITABLE CARRIER,T | 2.5-4 | 5-7 | 11-15 |
Tasks, applications and buyer value
For work that needs the tool facing a different direction, evaluate the tool orientation and work envelope before repeatedly repositioning the carrier.
Selection inputs and applicable conditions
Rotation-motor flow/pressure; cylinder flow/pressure; upper/lower connection dimensions; tool hydraulic demand; return conditions and clearance.
Rotation is not tilt. The swivel-joint description does not approve every breaker or compactor combination: the connected tool, return conditions, interfaces and machine stability must be reviewed.
Plan the work around the attachment
Start with the tool connection
Record pin diameters, centres, inside width and the intended tool interface. Identify the existing standard and its revision instead of relying on a similar name.
Choose the movement your job needs
A fixed coupler changes the tool connection; a tilting coupler adds tilt; a rotary coupler adds rotation. Compare those functions separately against the task and available clearance.
Confirm the installed configuration
Keep the locking method, hydraulic connections, installation drawing and applicable operating instructions with the proposed model. Separate the connected tool circuit from coupler actuation.
Available information and source documents
The supplied family material supports this type entry. Complete order configuration, current drawing and applicable operation documents remain part of the model review.
Selection and purchase guidance
Where this tool fits in the work.
Questions specific to this type
What should I compare before choosing Rotating Couplers?
Rotation-motor flow/pressure; cylinder flow/pressure; upper/lower connection dimensions; tool hydraulic demand; return conditions and clearance.
Which limits remain important for the purchase?
Rotation is not tilt. The swivel-joint description does not approve every breaker or compactor combination: the connected tool, return conditions, interfaces and machine stability must be reviewed.
