MAKE THE REQUIREMENT SPECIFIC
Work conditions to carry into selection.
Begin with the connected tool and both mounting interfaces. A fixed coupler changes the connection, a tilting configuration adds tilt, and the supplied R-series adds rotation. Compare each function and its own hydraulic requirements; rotation is not tilt and does not establish compatibility with every powered tool.
| Tool choice | Information to provide | Applicable conditions |
|---|---|---|
| Rotating Couplers ↗ | Rotation-motor flow/pressure; cylinder flow/pressure; upper/lower connection dimensions; tool hydraulic demand; return conditions and clearance. | Rotation is not tilt. The swivel-joint description does not approve every breaker or compactor combination: the connected tool, return conditions, interfaces and machine stability must be reviewed. |
| Tilting D Couplers ↗ | Required tilt angle; locking interface; swing-cylinder flow/pressure; connected tool geometry and clearance. | Tilt range is model-specific. A tilting coupler is not automatically a 360-degree rotating coupler or a tiltrotator. |
| Tilting S Couplers ↗ | S-type geometry; requested tilt angle; cylinder circuit; mounting envelope and attached tool. | The published angles differ by model. Do not transfer a D-type interface or another WTS model’s angle to this configuration. |
| Hydraulic Quick Couplers ↗ | Pin diameters at both connections; centre distances; inside widths; locking configuration; hydraulic circuit. | Confirm the locking arrangement and operating/verification instructions for the complete ordered configuration. A dimension range does not prove a match to every machine in the listed tonne class. |
| Cast Quick Couplers ↗ | Length, L1/L2, widths, pin diameter, body height, locking method and machine/tool drawings. | Do not substitute the WCQ drawing for a welded or double-lock model. Confirm the exact pin geometry and locking instructions. |
| Double-lock D Couplers ↗ | Front/rear connection geometry; locking sequence; cylinder flow/pressure; machine and attachment interface drawings. | The presence of two locks is not a substitute for the model-specific installation, operating and lock-check instructions. |
| Double-lock S Couplers ↗ | Pin diameter and centres; maximum opening; interface standard and revision; locking method; required circuit. | The source phrase “OS standards” has not been converted into a named certification or assumed Open-S compatibility. Request the exact standard/interface definition. |
| Mechanical Quick Couplers ↗ | Both interfaces; locking and verification method; machine/tool drawings; requested documents. | No mechanical model, locking procedure or hydraulic parameter is invented; the photograph is a quick-coupler family reference. |
Compare the relevant product configurations.
Quick Couplers
Rotating Couplers
Rotate a connected excavator attachment through 360° with the R-series rotary quick coupler.
3 source-listed modelsView configuration and details →Quick Couplers
Tilting D Couplers
Tilt a connected attachment for slopes, trenches and angled work with the WTD D-type coupler.
6 source-listed modelsView configuration and details →Quick Couplers
Tilting S Couplers
Add tool tilt to the WTS S-type coupler arrangement for angled excavation and finishing work.
4 source-listed modelsView configuration and details →Quick Couplers
Hydraulic Quick Couplers
Change between excavator tools with a hydraulically operated quick-coupler connection.
9 source-listed modelsView configuration and details →Quick Couplers
Cast Quick Couplers
Connect excavator tools using the WCQ cast-body quick-coupler arrangement.
2 source-listed modelsView configuration and details →Quick Couplers
Double-lock D Couplers
Connect excavator attachments with the WDQ D-type double-lock coupler range.
8 source-listed modelsView configuration and details →Quick Couplers
Double-lock S Couplers
Connect tools through the WSQ S-type double-lock coupler range; compare the exact S-interface geometry.
10 source-listed modelsView configuration and details →Quick Couplers
Mechanical Quick Couplers
Change excavator tools with a mechanically secured coupler configuration.
Configuration enquiry · model to confirmView configuration and details →Source-listed models for further review.
Hydraulic Quick Couplers ↗
| Complete model | Source specification snapshot | Details & download |
|---|---|---|
| WHC01 ↗ |
| All parameters and conditions ↗ Download reference · CSV ↗ |
| WHC02 ↗ |
| All parameters and conditions ↗ Download reference · CSV ↗ |
| WHC03 ↗ |
| All parameters and conditions ↗ Download reference · CSV ↗ |
| WHC04 ↗ |
| All parameters and conditions ↗ Download reference · CSV ↗ |
| WHC06 ↗ |
| All parameters and conditions ↗ Download reference · CSV ↗ |
| WHC08 ↗ |
| All parameters and conditions ↗ Download reference · CSV ↗ |
| WHC10 ↗ |
| All parameters and conditions ↗ Download reference · CSV ↗ |
| WHC14 ↗ |
| All parameters and conditions ↗ Download reference · CSV ↗ |
| WHC17 ↗ |
| All parameters and conditions ↗ Download reference · CSV ↗ |
Cast Quick Couplers ↗
| Complete model | Source specification snapshot | Details & download |
|---|---|---|
| WCQ06 ↗ |
| All parameters and conditions ↗ Download reference · CSV ↗ |
| WCQ08 ↗ |
| All parameters and conditions ↗ Download reference · CSV ↗ |
Double-lock D Couplers ↗
| Complete model | Source specification snapshot | Details & download |
|---|---|---|
| WDQ02 ↗ |
| All parameters and conditions ↗ Download reference · CSV ↗ |
| WDQ03 ↗ |
| All parameters and conditions ↗ Download reference · CSV ↗ |
| WDQ04 ↗ |
| All parameters and conditions ↗ Download reference · CSV ↗ |
| WDQ05 ↗ |
| All parameters and conditions ↗ Download reference · CSV ↗ |
| WDQ06 ↗ |
| All parameters and conditions ↗ Download reference · CSV ↗ |
| WDQ08 ↗ |
| All parameters and conditions ↗ Download reference · CSV ↗ |
| WDQ09 ↗ |
| All parameters and conditions ↗ Download reference · CSV ↗ |
| WDQ10 ↗ |
| All parameters and conditions ↗ Download reference · CSV ↗ |
Double-lock S Couplers ↗
| Complete model | Source specification snapshot | Details & download |
|---|---|---|
| WSQ30 ↗ |
| All parameters and conditions ↗ Download reference · CSV ↗ |
| WSQ40 ↗ |
| All parameters and conditions ↗ Download reference · CSV ↗ |
| WSQ45 ↗ |
| All parameters and conditions ↗ Download reference · CSV ↗ |
| WSQ50 ↗ |
| All parameters and conditions ↗ Download reference · CSV ↗ |
| WSQ60 ↗ |
| All parameters and conditions ↗ Download reference · CSV ↗ |
| WSQ65 ↗ |
| All parameters and conditions ↗ Download reference · CSV ↗ |
| WSQ70 ↗ |
| All parameters and conditions ↗ Download reference · CSV ↗ |
| WSQ70/55 ↗ |
| All parameters and conditions ↗ Download reference · CSV ↗ |
| WSQ80 ↗ |
| All parameters and conditions ↗ Download reference · CSV ↗ |
| WSQ90 ↗ |
| All parameters and conditions ↗ Download reference · CSV ↗ |
Tilting D Couplers ↗
| Complete model | Source specification snapshot | Details & download |
|---|---|---|
| WTD02 ↗ |
| All parameters and conditions ↗ Download reference · CSV ↗ |
| WTD03 ↗ |
| All parameters and conditions ↗ Download reference · CSV ↗ |
| WTD04 ↗ |
| All parameters and conditions ↗ Download reference · CSV ↗ |
| WTD05 ↗ |
| All parameters and conditions ↗ Download reference · CSV ↗ |
| WTD06 ↗ |
| All parameters and conditions ↗ Download reference · CSV ↗ |
| WTD08 ↗ |
| All parameters and conditions ↗ Download reference · CSV ↗ |
Tilting S Couplers ↗
| Complete model | Source specification snapshot | Details & download |
|---|---|---|
| WTS40 ↗ |
| All parameters and conditions ↗ Download reference · CSV ↗ |
| WTS45 ↗ |
| All parameters and conditions ↗ Download reference · CSV ↗ |
| WTS60 ↗ |
| All parameters and conditions ↗ Download reference · CSV ↗ |
| WTS70 ↗ |
| All parameters and conditions ↗ Download reference · CSV ↗ |
Rotating Couplers ↗
| Complete model | Source specification snapshot | Details & download |
|---|---|---|
| WRQ02 ↗ |
| All parameters and conditions ↗ Download reference · CSV ↗ |
| WRQ4 ↗ |
| All parameters and conditions ↗ Download reference · CSV ↗ |
| WRQ06 ↗ |
| All parameters and conditions ↗ Download reference · CSV ↗ |
Read the selection guidance.
BUYING GUIDE
Quick coupler types and configuration review
The supplied WHC, WCQ, WDQ, WSQ, WTD, WTS and WRQ pages distinguish hydraulic, cast, double-lock, tilting and rotating types. Rotation and tilt are different functions; a rotating quick coupler is not automatically a tiltrotator.
Read the guide →BUYING GUIDE
How to prepare quick coupler measurements
The pre-order form identifies front and rear pin diameters A1/A2, centre distance B and widths C1/C2. Record what each width measures, include units and attach labelled photographs or a drawing.
Read the guide →BUYING GUIDE
What to include in an attachment quotation request
The supplied order process covers customer identity, machine brand/model/year, installation dimensions/oil ports, working conditions, function/specification and a completeness check.
Read the guide →BUYING GUIDE
Machine and attachment compatibility information
Provide exact brand, model and year, working weight and available machine documents. Add serial information when needed for configuration review.
Read the guide →BUYING GUIDE
Read the quick coupler warranty by component
The supplied quick-coupler matrix distinguishes body, hydraulic lock, cylinder, valve, pins, hoses and switch. Standard and rotating arrangements have different conditions.
Read the guide →BUYING GUIDE
Rotating vs tilting couplers: choose the movement you need
A rotary coupler changes the tool orientation through the 360-degree rotation described in the R-series source. A tilting coupler changes the tool angle within its model-specific tilt range. These are different motions; neither label alone establishes a tiltrotator.
Read the guide →BUYING GUIDE
Prepare a multi-attachment fleet compatibility record
Record exact model/year, machine weight, available interface drawings and hydraulic circuit information. Group by confirmed configuration rather than tonne class alone.
Read the guide →Original product information.
PDF · 12 PAGES
Quick Coupler Selection Guide
View the original pages and retain the relevant version with your enquiry.
PDF · 48 PAGES
Excavator Attachment Catalogue
View the original pages and retain the relevant version with your enquiry.
Continue through the work.
Excavate to the required profile
Match the ground and excavation geometry to bucket width, edge/teeth and the machine connection. Rock-bearing material and finishing work should not share one generic bucket specification.
Explore the scenario →Construction & EarthworkClean and finish the surface
A toothless cleaning bucket shapes a different contact surface from a digging bucket. If the job needs angled positioning, compare a tilting bucket and a tilting coupler as separate configurations.
Explore the scenario →Construction & EarthworkLoosen, then compact
Loosening resistant material and compacting placed fill are separate operations. Specify the ripper geometry or compactor plate, access and machine/circuit data for the relevant stage.
Explore the scenario →Construction & EarthworkPlan digging and gripping as defined functions
Describe the material, bucket work and gripping movement before choosing a combined form or separate thumb. The excavator multi-purpose bucket and skid-steer 4-in-1 bucket are different carrier configurations. Identify the exact carrier, mounting, opening and any auxiliary circuit; a function count does not establish capacity or a handled-load rating.
Explore the scenario →