Excavator attachment supply · Ningbo, China Search · FAQ · Support · Market / EnglishWhatsApp +86 15058273161
WE-ATTACH

WE-ATTACH / EXCAVATOR ATTACHMENTS

Forestry & Landscaping

Timber handling and drilling for fencing or planting follow two different selection paths. Keep log geometry and stacking separate from ground, hole and drilling-string requirements.

Explore the work stages

START WITH THE WORK

Keep timber handling and ground work distinct.

01

Handle and stack timber

Record log diameter, length and load arrangement, together with the pickup and stacking space. Compare jaw form, opening and rotation requirements for the intended movement.

Explore this work scenario
02

Drill for posts or planting

Define hole diameter/depth and ground conditions before reviewing drive, shaft, auger and teeth. Include machine flow and pressure and the mounting arrangement.

Explore this work scenario
03

Clarify vegetation handling

If the task involves loose green material, describe its size and handling method. The supplied grass-grapple form is an enquiry starting point, not a claim of a complete forestry processing line.

Explore this work scenario

The material and work stage

Timber handling and drilling for fencing or planting follow two different selection paths. Keep log geometry and stacking separate from ground, hole and drilling-string requirements.

Information for the configuration review

Timber dimensions/handling method or ground/hole requirement; machine, interface/circuit, terrain and working envelope.

Documents to keep with the proposal

Keep the complete model/suffix, machine and mounting information with the relevant drawing and operating requirements. For timber and drilling enquiries, maintain separate material or ground descriptions.

Application scope

These are selection pathways drawn from the supplied product material. Confirm the exact configuration and site conditions; no customer project or measured site result is represented by the product photographs.

Start with the relevant attachment family

Model references and source specifications for this industry

Auger Drives ↗

Model-specific source values · original fields and units retained
Complete modelSource specification snapshotDetails & download
WD2 ↗
WEIGHT OF CARRIER,T
1-2.5
OIL FLOW,L/MIN
25-57
MAX. TORQUE, NM
2180
Source P03 · p.4 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WD3 ↗
WEIGHT OF CARRIER,T
2-4
OIL FLOW,L/MIN
27-75
MAX. TORQUE, NM
2870
Source P03 · p.4 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WD5 ↗
WEIGHT OF CARRIER,T
3-5
OIL FLOW,L/MIN
50-95
MAX. TORQUE, NM
4500
Source P03 · p.4 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WD6 ↗
WEIGHT OF CARRIER,T
4.5-7
OIL FLOW,L/MIN
40-115
MAX. TORQUE, NM
5470
Source P03 · p.4 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WD7 ↗
WEIGHT OF CARRIER,T
5-7
OIL FLOW,L/MIN
60-135
MAX. TORQUE, NM
6830
Source P03 · p.4 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WD8 ↗
WEIGHT OF CARRIER,T
6-8
MAX. TORQUE, NM
8100
UNIT DIAMETER, MM
269
Source P03 · p.4 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WD10 ↗
WEIGHT OF CARRIER,T
6-10
OIL FLOW,L/MIN
70-150
MAX. TORQUE, NM
10600
Source P03 · p.4 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WD12 ↗
WEIGHT OF CARRIER,T
6-10
OIL FLOW,L/MIN
70-150
MAX. TORQUE, NM
12600
Source P03 · p.4 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WD15 ↗
WEIGHT OF CARRIER,T
10-15
OIL FLOW,L/MIN
80-170
MAX. TORQUE, NM
15000
Source P03 · p.4 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WD20 ↗
WEIGHT OF CARRIER,T
13-20
OIL FLOW,L/MIN
80-170
MAX. TORQUE, NM
19500
Source P03 · p.4 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WD25 ↗
WEIGHT OF CARRIER,T
15-22
OIL FLOW,L/MIN
80-170
MAX. TORQUE, NM
24800
Source P03 · p.4 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WD30 ↗
OIL FLOW,L/MIN
80-225
MAX. TORQUE, NM
28000
OIL PRESSURE, BAR
180-310
Source P03 · p.4 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WD35 ↗
WEIGHT OF CARRIER,T
20-45
OIL FLOW,L/MIN
80-225
MAX. TORQUE, NM
35000
Source P03 · p.4 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WD50 ↗
AUGER DIAMETER REFERENCE, MM
300-1800
OUTPUT SHAFT, MM
SQUARE 110
Source P02 · p.21 ↗ Source P03 · p.4 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WD80 ↗
WEIGHT OF CARRIER,T
21-50
OIL FLOW,L/MIN
100-280
MAX. TORQUE, NM
75000
Source P03 · p.4 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WDR3 ↗
CARRIER REFERENCE (AS PRINTED)
CMU UP TO 9T/M
OIL FLOW,L/MIN
5-35
MAX. TORQUE, NM
3100
Source P03 · p.4 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WDR6 ↗
CARRIER REFERENCE (AS PRINTED)
CMU UP TO 15T/M
OIL FLOW,L/MIN
15-50
MAX. TORQUE, NM
5470
Source P03 · p.4 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WDR7 ↗
CARRIER REFERENCE (AS PRINTED)
CMU UP TO 18T/M
OIL FLOW,L/MIN
15-50
MAX. TORQUE, NM
6830
Source P03 · p.4 ↗
All parameters and conditions ↗
Download reference · CSV ↗

Wood & Stone Grapples ↗

Model-specific source values · original fields and units retained
Complete modelSource specification snapshotDetails & download
WRG03 ↗
SUITABLE EXCAVATOR,T
4-6
CYLINDER OIL FLOW,L/MIN
30-55
MOTOR OIL FLOW,L/MIN
30-50
Source P03 · p.24 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WRG04 ↗
SUITABLE EXCAVATOR,T
7-11
CYLINDER OIL FLOW,L/MIN
50-100
MOTOR OIL FLOW,L/MIN
30-50
Source P03 · p.24 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WRG06 ↗
SUITABLE EXCAVATOR,T
12-16
CYLINDER OIL FLOW,L/MIN
90-110
MOTOR OIL FLOW,L/MIN
30-50
Source P03 · p.24 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WRG08 ↗
SUITABLE EXCAVATOR,T
17-24
CYLINDER OIL FLOW,L/MIN
100-140
MOTOR OIL FLOW,L/MIN
30-50
Source P03 · p.24 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WRG10 ↗
SUITABLE EXCAVATOR,T
25-35
CYLINDER OIL FLOW,L/MIN
130-170
MOTOR OIL FLOW,L/MIN
30-50
Source P03 · p.24 ↗
All parameters and conditions ↗
Download reference · CSV ↗

W- & F-type Log Grapples ↗

Model-specific source values · original fields and units retained
Complete modelSource specification snapshotDetails & download
WRG08P ↗
SUITABLE EXCAVATOR,T
5-10
CYLINDER OIL FLOW,L/MIN
30-50
MOTOR OIL FLOW,L/MIN
30-50
Source P03 · p.26 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WRG08F ↗
SUITABLE EXCAVATOR,T
5-10
CYLINDER OIL FLOW,L/MIN
30-50
MOTOR OIL FLOW,L/MIN
30-50
Source P03 · p.26 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WRG20F ↗
SUITABLE EXCAVATOR,T
11-20
CYLINDER OIL FLOW,L/MIN
40-60
MOTOR OIL FLOW,L/MIN
30-50
Source P03 · p.26 ↗
All parameters and conditions ↗
Download reference · CSV ↗

Log Grapples ↗

Model-specific source values · original fields and units retained
Complete modelSource specification snapshotDetails & download
WDG04 ↗
SUITABLE EXCAVATOR,T
2.5-4
GRAPPLE OPERATION FLOW,L/MIN
20-30
ROTATION WORKING FLOW, L/MIN
/
Source P03 · p.30 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WDG06 ↗
SUITABLE EXCAVATOR,T
4-6
GRAPPLE OPERATION FLOW,L/MIN
40-60
ROTATION WORKING FLOW, L/MIN
30-50
Source P03 · p.30 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WDG08 ↗
SUITABLE EXCAVATOR,T
6-10
GRAPPLE OPERATION FLOW,L/MIN
70-110
ROTATION WORKING FLOW, L/MIN
30-50
Source P03 · p.30 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WDG15 ↗
SUITABLE EXCAVATOR,T
11-17
GRAPPLE OPERATION FLOW,L/MIN
100-120
ROTATION WORKING FLOW, L/MIN
30-50
Source P03 · p.30 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WDG25 ↗
SUITABLE EXCAVATOR,T
18-27
GRAPPLE OPERATION FLOW,L/MIN
120-160
ROTATION WORKING FLOW, L/MIN
40-60
Source P03 · p.30 ↗
All parameters and conditions ↗
Download reference · CSV ↗
WDG30 ↗
SUITABLE EXCAVATOR,T
28-35
GRAPPLE OPERATION FLOW,L/MIN
150-180
ROTATION WORKING FLOW, L/MIN
40-60
Source P03 · p.30 ↗
All parameters and conditions ↗
Download reference · CSV ↗

Selection and purchase guidance

Source and document traceability

Catalogue transcription for preliminary review. Confirm the applicable configuration and current approved revision before order.

CONTINUE YOUR REVIEW

Related information for your next decision

Discuss your machine, application and configuration →

What do you need to do?

Start with part of a model or describe the job. Suggested results are for selection review.