FROM AN IDEA TO A REQUIREMENT
What to specify for this attachment
Use these decisions to turn the work requirement into a model and configuration enquiry.
| Decision | Why it matters | Information to provide |
|---|---|---|
| Work stage and material | Steel cutting, primary concrete processing and secondary reduction are not interchangeable. | Material, section/reinforcement and the proposed work sequence. |
| Jaw and mounting arrangement | Opening and tool position affect access and the working envelope. | Section/block size, mounting position and required reach/clearance. |
| Hydraulics and positioning | Working and rotation requirements belong to the exact head arrangement. | Machine, flow, pressure and the required rotation circuit. |
| Wear parts and documents | Blade/tooth arrangement and technical revision stay with the configuration. | Full model/suffix, blade/teeth information and current drawing requirements. |
View the supplied catalogue drawing and original technical page
Supplier-provided catalogue reference · P03 physical page 18. Check the exact model header, configuration and source version. This excerpt is not a substitute for the current approved installation drawing or a model-specific test report.

Catalogue specifications and source
| Field | Catalogue reference | Source physical page |
|---|---|---|
| Model | WCR10 | P03 · p.18 ↗ |
| MAX. OPENING WIDTH,MM | 620 | P03 · p.18 ↗ |
| WEIGHT,KG | 660 | P03 · p.18 ↗ |
| CRUSHING FORCE,KN | 380 | P03 · p.18 ↗ |
| SHEARING FORCE,KN | 1460 | P03 · p.18 ↗ |
| CYLINDER WORKING PRESSURE, BAR | 200-300 | P03 · p.18 ↗ |
| CYLINDER OIL FLOW,L/MIN | 60-120 | P03 · p.18 ↗ |
| MOTOR WORKING PRESSURE,BAR | 60-90 | P03 · p.18 ↗ |
| MOTOR OIL FLOW,L/MIN | 20-30 | P03 · p.18 ↗ |
| SUITABLE EXCAVATOR,T | 11-16 | P03 · p.18 ↗ |
| ROTATION MODE | MECHANICAL OR HYDRAULIC, 360° FREE ROTATION | P03 · p.18 ↗ |
| A | 1237 | P03 · p.18 ↗ |
| B | 620 | P03 · p.18 ↗ |
| C | 125 | P03 · p.18 ↗ |
| D | 486 | P03 · p.18 ↗ |
| E | 419 | P03 · p.18 ↗ |
Drawing letters such as A/B refer to the original drawing keys; verify dimensions and units with the current model drawing.
Purpose and task
WCR10 is the cr hydraulic crusher reference for concrete processing. Process concrete with the WCR hydraulic-crusher range; match jaw geometry to the structure and work stage.
How this helps your buying decision
Describe the concrete section and reinforcement, then check opening, jaw envelope, mounting and machine stability. Compare WCR10 with WCR15 as separate source-listed configurations. For CYLINDER OIL FLOW,L/MIN, the listed values are 60-120 (WCR10) and 140-240 (WCR15). For MOTOR OIL FLOW,L/MIN, the listed values are 20-30 (WCR10) and 30-50 (WCR15). Keep units, mounting position, circuit labels and document conditions with each value. Similar model numbers or overlapping carrier references do not prove fitment, interchangeability or a better result for your task.
Model and configuration
The model-specific source row states: MAX. OPENING WIDTH,MM: 620; WEIGHT,KG: 660; CRUSHING FORCE,KN: 380; SHEARING FORCE,KN: 1460; CYLINDER WORKING PRESSURE, BAR: 200-300; CYLINDER OIL FLOW,L/MIN: 60-120; MOTOR WORKING PRESSURE,BAR: 60-90; MOTOR OIL FLOW,L/MIN: 20-30; SUITABLE EXCAVATOR,T: 11-16; ROTATION MODE: MECHANICAL OR HYDRAULIC, 360° FREE ROTATION; A: 1237; B: 620; C: 125; D: 486; E: 419. Retain the printed units, dimension keys and applicable circuit or mounting labels; unknown drawing units require confirmation rather than conversion.
Machine and interface review
Describe the concrete section and reinforcement, then check opening, jaw envelope, mounting and machine stability. Check mounting pins, centres, inside width, overall envelope and clearance through the intended movement against the actual assembly drawing. Catalogue carrier references are preliminary selection information, not machine-specific approval.
Installation, control and operating conditions
The source lists CYLINDER WORKING PRESSURE, BAR: 200-300; CYLINDER OIL FLOW,L/MIN: 60-120; MOTOR WORKING PRESSURE,BAR: 60-90; MOTOR OIL FLOW,L/MIN: 20-30. Check the actual machine flow/pressure at the intended settings, control/valve arrangement, hose/coupling dimensions, return/back-pressure and any case-drain requirement against the current hydraulic drawing. Separate catalogue ranges or maxima do not establish one approved simultaneous running point. Choose mechanical or hydraulic rotation explicitly. The merged family row is an option description, not proof that both modes are supplied. CR and CC have their own geometry.
Structure and differences
The catalogue provides a jaw drawing, opening/weight, hydraulic requirements and dimensional keys. The source’s construction descriptions must be tied to the actual manufacturing configuration. Choose mechanical or hydraulic rotation explicitly. The merged family row is an option description, not proof that both modes are supplied. CR and CC have their own geometry.
Application boundaries
CR and CC are separate configurations. Do not assume identical opening, dimensions or duty from similar model numbers; casting/strength and life claims need applicable evidence.
Manufacturing and quality responsibility
WE-ATTACH supports attachment selection, configuration requirements and coordinated supply through core manufacturing partners, with a warehouse and hillside testing site. Keep the actual manufacturer, ordered model and applicable scope with inspection, material or compliance records. A partner facility certificate or catalogue image is not model-specific product approval.
Documents, parts and operation
Use P03 physical PDF page 18 and the model-reference CSV linked on this page. Each exported parameter retains its source ID and physical page. Catalogue sketches, source images and selection tables are reference information; request the current mounting/connection drawing, operating and maintenance instructions and model-specific evidence for the actual ordered configuration.
Options and scope of supply
Confirm jaw/tooth and blade arrangement, wear parts, rotation equipment and the quoted head. Have the quotation identify the attachment, mounting, controls/connections, included accessories and required parts individually. A pictured option, support frame or related tool is not automatically included.
Information to send with a WCR10 enquiry
For WCR10, send machine make/model and operating weight; mounting/linkage dimensions; available circuit and return information where applicable; material, work stage, access/reach and desired result; Concrete/reinforcement; processing stage; jaw opening; mounting/stability; rotation and cylinder circuits. Include quantity, destination and any drawings/photos. State units and identify unknown values rather than substituting a similar machine or model.
Before confirming the order
Agree the complete model and suffix, actual machine, interfaces, operating conditions and scope of supply. Keep unresolved source descriptions and accepted drawing/document revisions with the quotation. Confirm inspection/document requirements, price, delivery, warranty and service scope for the actual order; no unverified term or performance commitment is added here.
Source and document traceability
Catalogue transcription for preliminary review. Confirm the applicable configuration and current approved revision before order.
- Excavator Attachment Catalogue ↗ · PDF physical page 18
Applications and working conditions
Selection and purchase guides
Questions before selection
What task does WCR10 address?
WCR10 is the cr hydraulic crusher reference for concrete processing. Process concrete with the WCR hydraulic-crusher range; match jaw geometry to the structure and work stage.
Which information should accompany a WCR10 enquiry?
For WCR10, send machine make/model and operating weight; mounting/linkage dimensions; available circuit and return information where applicable; material, work stage, access/reach and desired result; Concrete/reinforcement; processing stage; jaw opening; mounting/stability; rotation and cylinder circuits. Include quantity, destination and any drawings/photos. State units and identify unknown values rather than substituting a similar machine or model.
What must be checked before confirming this configuration?
CR and CC are separate configurations. Do not assume identical opening, dimensions or duty from similar model numbers; casting/strength and life claims need applicable evidence.
How should I compare WCR10 with another configuration?
Compare WCR10 with WCR15 as separate source-listed configurations. For CYLINDER OIL FLOW,L/MIN, the listed values are 60-120 (WCR10) and 140-240 (WCR15). For MOTOR OIL FLOW,L/MIN, the listed values are 20-30 (WCR10) and 30-50 (WCR15). Keep units, mounting position, circuit labels and document conditions with each value. Similar model numbers or overlapping carrier references do not prove fitment, interchangeability or a better result for your task. Choose mechanical or hydraulic rotation explicitly. The merged family row is an option description, not proof that both modes are supplied. CR and CC have their own geometry.
What installation and operating information is needed for WCR10?
Describe the concrete section and reinforcement, then check opening, jaw envelope, mounting and machine stability. The source lists CYLINDER WORKING PRESSURE, BAR: 200-300; CYLINDER OIL FLOW,L/MIN: 60-120; MOTOR WORKING PRESSURE,BAR: 60-90; MOTOR OIL FLOW,L/MIN: 20-30. Check the actual machine flow/pressure at the intended settings, control/valve arrangement, hose/coupling dimensions, return/back-pressure and any case-drain requirement against the current hydraulic drawing. Separate catalogue ranges or maxima do not establish one approved simultaneous running point.
Where can I check the source and current documents for WCR10?
Use P03 physical PDF page 18 and the model-reference CSV linked on this page. Each exported parameter retains its source ID and physical page. Catalogue sketches, source images and selection tables are reference information; request the current mounting/connection drawing, operating and maintenance instructions and model-specific evidence for the actual ordered configuration.
Which parts and options should the WCR10 quotation identify?
Confirm jaw/tooth and blade arrangement, wear parts, rotation equipment and the quoted head. Confirm the exact configuration and each included item rather than using a family illustration as a packing list.
Related model references
Product type and related work stages
Fixed Pulverizers
Reduce concrete in secondary processing with the WFP fixed-pulverizer range.
6 listed modelsView type, details & selection →Rotating Pulverizers
Position the jaws around concrete and carry out secondary processing with the WRP rotating-pulverizer range.
3 listed modelsView type, details & selection →Hydraulic Steel Shears
Cut steel sections and prepare metal for handling with the WHS hydraulic steel-shear range.
5 listed modelsView type, details & selection →Pulverizers with Magnet
Combine concrete processing with a separately specified magnetic-recovery arrangement.
1 listed modelsView type, details & selection →