Excavator attachment supply · Ningbo, China Search · FAQ · Support · Market / EnglishWhatsApp +86 15058273161
WE-ATTACH

Shears & Pulverizers

Hydraulic Steel Shear

MODEL WHS30

WHS30 hydraulic steel shear for steel cutting. Share your machine and job details to review the setup.

Specify boom or arm mounting, the actual steel section and available reach. Check carrier stability with the complete shear and bracket mass.

Max. Opening Width, Mm
745
Cylinder Working Pressure, Bar
300-350
Cylinder Oil Flow, L/Min
180-240
Motor Working Pressure, Bar
120-160
Supplied hydraulic steel shear family image; it does not identify every WHS30 option, interface or included accessory.

FROM AN IDEA TO A REQUIREMENT

What to specify for this attachment

Use these decisions to turn the work requirement into a model and configuration enquiry.

Information to carry into the review
DecisionWhy it mattersInformation to provide
Work stage and materialSteel cutting, primary concrete processing and secondary reduction are not interchangeable.Material, section/reinforcement and the proposed work sequence.
Jaw and mounting arrangementOpening and tool position affect access and the working envelope.Section/block size, mounting position and required reach/clearance.
Hydraulics and positioningWorking and rotation requirements belong to the exact head arrangement.Machine, flow, pressure and the required rotation circuit.
Wear parts and documentsBlade/tooth arrangement and technical revision stay with the configuration.Full model/suffix, blade/teeth information and current drawing requirements.
View the supplied catalogue drawing and original technical page

Supplier-provided catalogue reference · P03 physical page 15. Check the exact model header, configuration and source version. This excerpt is not a substitute for the current approved installation drawing or a model-specific test report.

Original supplied catalogue technical page 15

Catalogue specifications and source

Original units retained; not a machine compatibility approval
FieldCatalogue referenceSource physical page
ModelWHS30P03 · p.15 ↗
MAX. OPENING WIDTH, MM745P03 · p.15 ↗
WEIGHT, KG2960P03 · p.15 ↗
AVERAGE SHEARING FORCE, KN1710P03 · p.15 ↗
CYLINDER WORKING PRESSURE, BAR300-350P03 · p.15 ↗
CYLINDER OIL FLOW, L/MIN180-240P03 · p.15 ↗
MOTOR WORKING PRESSURE, BAR120-160P03 · p.15 ↗
MOTOR OIL FLOW, L/MIN30-50P03 · p.15 ↗
SUITABLE EXCAVATOR, T20-30P03 · p.15 ↗
ROTATION MODEHYDRAULIC ROTATING, 360° FREE ROTATIONP03 · p.15 ↗

Drawing letters such as A/B refer to the original drawing keys; verify dimensions and units with the current model drawing.

Purpose and task

WHS30 is the hydraulic steel shear reference for steel cutting. Cut steel sections and prepare metal for handling with the WHS hydraulic steel-shear range.

How this helps your buying decision

Specify boom or arm mounting, the actual steel section and available reach. Check carrier stability with the complete shear and bracket mass. Compare WHS30 with WHS25 as separate source-listed configurations. For CYLINDER OIL FLOW, L/MIN, the listed values are 180-240 (WHS30) and 180-240 (WHS25). For MOTOR OIL FLOW, L/MIN, the listed values are 30-50 (WHS30) and 30-50 (WHS25). Keep units, mounting position, circuit labels and document conditions with each value. Similar model numbers or overlapping carrier references do not prove fitment, interchangeability or a better result for your task.

Model and configuration

The model-specific source row states: MAX. OPENING WIDTH, MM: 745; WEIGHT, KG: 2960; AVERAGE SHEARING FORCE, KN: 1710; CYLINDER WORKING PRESSURE, BAR: 300-350; CYLINDER OIL FLOW, L/MIN: 180-240; MOTOR WORKING PRESSURE, BAR: 120-160; MOTOR OIL FLOW, L/MIN: 30-50; SUITABLE EXCAVATOR, T: 20-30; ROTATION MODE: HYDRAULIC ROTATING, 360° FREE ROTATION. Retain the printed units, dimension keys and applicable circuit or mounting labels; unknown drawing units require confirmation rather than conversion.

Machine and interface review

Specify boom or arm mounting, the actual steel section and available reach. Check carrier stability with the complete shear and bracket mass. Check mounting pins, centres, inside width, overall envelope and clearance through the intended movement against the actual assembly drawing. Catalogue carrier references are preliminary selection information, not machine-specific approval.

Installation, control and operating conditions

The source lists CYLINDER WORKING PRESSURE, BAR: 300-350; CYLINDER OIL FLOW, L/MIN: 180-240; MOTOR WORKING PRESSURE, BAR: 120-160; MOTOR OIL FLOW, L/MIN: 30-50. Check the actual machine flow/pressure at the intended settings, control/valve arrangement, hose/coupling dimensions, return/back-pressure and any case-drain requirement against the current hydraulic drawing. Separate catalogue ranges or maxima do not establish one approved simultaneous running point. Cylinder and rotation-motor circuits are different. The main table and dimension table carry different model headers; do not assign the dimension table by column position.

Structure and differences

The source material describes blade arrangements, a piston motor, an acceleration valve and cylinder construction; materials and component choices need to match the ordered model/BOM. Cylinder and rotation-motor circuits are different. The main table and dimension table carry different model headers; do not assign the dimension table by column position.

Application boundaries

The steel-shear parameter and dimension headers conflict. Keep their tables separate; comparative efficiency, blade-life and strength figures are not treated as verified results. P03 page 15 lists WHS08/25/30/40/55 in the main table but WHS06/08/10/14/15 in the dimension table. The mismatched dimension columns are not assigned to this main model row.

Manufacturing and quality responsibility

WE-ATTACH supports attachment selection, configuration requirements and coordinated supply through core manufacturing partners, with a warehouse and hillside testing site. Keep the actual manufacturer, ordered model and applicable scope with inspection, material or compliance records. A partner facility certificate or catalogue image is not model-specific product approval.

Documents, parts and operation

Use P03 physical PDF page 15 and the model-reference CSV linked on this page. Each exported parameter retains its source ID and physical page. Catalogue sketches, source images and selection tables are reference information; request the current mounting/connection drawing, operating and maintenance instructions and model-specific evidence for the actual ordered configuration.

Options and scope of supply

Identify blades, blade adjustment/fasteners, pins, hoses and the approved mounting drawing. Have the quotation identify the attachment, mounting, controls/connections, included accessories and required parts individually. A pictured option, support frame or related tool is not automatically included.

Information to send with a WHS30 enquiry

For WHS30, send machine make/model and operating weight; mounting/linkage dimensions; available circuit and return information where applicable; material, work stage, access/reach and desired result; Steel/section; opening; cutting-force definition; mounting position; cylinder/rotation circuits; approved model drawing. Include quantity, destination and any drawings/photos. State units and identify unknown values rather than substituting a similar machine or model.

Before confirming the order

Agree the complete model and suffix, actual machine, interfaces, operating conditions and scope of supply. Keep unresolved source descriptions and accepted drawing/document revisions with the quotation. Confirm inspection/document requirements, price, delivery, warranty and service scope for the actual order; no unverified term or performance commitment is added here.

Source and document traceability

Catalogue transcription for preliminary review. Confirm the applicable configuration and current approved revision before order.

Applications and working conditions

Selection and purchase guides

Questions before selection

What task does WHS30 address?

WHS30 is the hydraulic steel shear reference for steel cutting. Cut steel sections and prepare metal for handling with the WHS hydraulic steel-shear range.

Which information should accompany a WHS30 enquiry?

For WHS30, send machine make/model and operating weight; mounting/linkage dimensions; available circuit and return information where applicable; material, work stage, access/reach and desired result; Steel/section; opening; cutting-force definition; mounting position; cylinder/rotation circuits; approved model drawing. Include quantity, destination and any drawings/photos. State units and identify unknown values rather than substituting a similar machine or model.

What must be checked before confirming this configuration?

The steel-shear parameter and dimension headers conflict. Keep their tables separate; comparative efficiency, blade-life and strength figures are not treated as verified results. P03 page 15 lists WHS08/25/30/40/55 in the main table but WHS06/08/10/14/15 in the dimension table. The mismatched dimension columns are not assigned to this main model row.

How should I compare WHS30 with another configuration?

Compare WHS30 with WHS25 as separate source-listed configurations. For CYLINDER OIL FLOW, L/MIN, the listed values are 180-240 (WHS30) and 180-240 (WHS25). For MOTOR OIL FLOW, L/MIN, the listed values are 30-50 (WHS30) and 30-50 (WHS25). Keep units, mounting position, circuit labels and document conditions with each value. Similar model numbers or overlapping carrier references do not prove fitment, interchangeability or a better result for your task. Cylinder and rotation-motor circuits are different. The main table and dimension table carry different model headers; do not assign the dimension table by column position.

What installation and operating information is needed for WHS30?

Specify boom or arm mounting, the actual steel section and available reach. Check carrier stability with the complete shear and bracket mass. The source lists CYLINDER WORKING PRESSURE, BAR: 300-350; CYLINDER OIL FLOW, L/MIN: 180-240; MOTOR WORKING PRESSURE, BAR: 120-160; MOTOR OIL FLOW, L/MIN: 30-50. Check the actual machine flow/pressure at the intended settings, control/valve arrangement, hose/coupling dimensions, return/back-pressure and any case-drain requirement against the current hydraulic drawing. Separate catalogue ranges or maxima do not establish one approved simultaneous running point.

Where can I check the source and current documents for WHS30?

Use P03 physical PDF page 15 and the model-reference CSV linked on this page. Each exported parameter retains its source ID and physical page. Catalogue sketches, source images and selection tables are reference information; request the current mounting/connection drawing, operating and maintenance instructions and model-specific evidence for the actual ordered configuration.

Which parts and options should the WHS30 quotation identify?

Identify blades, blade adjustment/fasteners, pins, hoses and the approved mounting drawing. Confirm the exact configuration and each included item rather than using a family illustration as a packing list.

Related model references

Where this tool fits in the work.

Discuss WHS30 with your project conditions

Missing a technical value? Describe what is available so the next information needed can be identified.

CONTINUE YOUR REVIEW

Related information for your next decision

Discuss your machine, application and configuration →

What do you need to do?

Start with part of a model or describe the job. Suggested results are for selection review.