FROM AN IDEA TO A REQUIREMENT
What to specify for this attachment
Use these decisions to turn the work requirement into a model and configuration enquiry.
| Decision | Why it matters | Information to provide |
|---|---|---|
| Material and jaw form | Timber, stone, scrap and mixed material place different demands on contact and retention. | Material shape, dimensions and handling method. |
| Opening and handled load | Opening geometry does not establish a rated handled load. | Actual load, attachment mass and the machine working envelope. |
| Placement movement | Pickup, transfer and stacking space determine the positioning requirement. | Required rotation, reach, transfer height and placement conditions. |
| Connection and circuit | Mounting and actuation details stay specific to the proposed configuration. | Machine/interface, hydraulic circuits and applicable product documents. |
Structure and functions in the supplied material
Opposing jaws grip irregular material below the upper excavator mounting. Jaw and tooth form should be chosen for timber, stone or the stated material rather than treating those loads as interchangeable. The table separates opening, attachment weight, hydraulic requirements and mounting/dimensional keys.
Models and parameter comparison
| Parameter | WRG03 ↗ | WRG04 ↗ | WRG06 ↗ | WRG08 ↗ | WRG10 ↗ |
|---|---|---|---|---|---|
| MAX. OPENING WIDTH,MM | 1300 | 1400 | 1800 | 2300 | 2500 |
| WEIGHT,KG | 420 | 440 | 800 | 1400 | 1830 |
| CYLINDER WORKING PRESSURE,BAR | 110-140 | 120-160 | 150-170 | 160-180 | 160-180 |
| CYLINDER OIL FLOW,L/MIN | 30-55 | 50-100 | 90-110 | 100-140 | 130-170 |
| MOTOR WORKING PRESSURE,BAR | 120-140 | 120-140 | 120-160 | 120-160 | 120-160 |
| MOTOR OIL FLOW,L/MIN | 30-50 | 30-50 | 30-50 | 30-50 | 30-50 |
| MAX. LOAD CAPACITY, KG | 1500 | 2000 | 3000 | 5000 | 8000 |
| SUITABLE EXCAVATOR,T | 4-6 | 7-11 | 12-16 | 17-24 | 25-35 |
| A | 420 | 420 | 550 | 660 | 750 |
| B | 240 | 240 | 320 | 380 | 420 |
| C | 1270 | 1250 | 1730 | 2110 | 2230 |
| D | 680 | 695 | 735 | 1240 | 1325 |
| E | 865 | 916 | 1115 | 1500 | 1595 |
| F | 1300 | 1400 | 1800 | 2300 | 2500 |
| G | 1410 | 1520 | 1950 | 2470 | 2790 |
| H | 1175 | 1145 | 1525 | 1920 | 2095 |
Tasks, applications and buyer value
Compare the actual piece shape and grip envelope rather than choosing a grapple from carrier tonnage alone.
Selection inputs and applicable conditions
Material dimensions/density; jaw/tooth choice; opening; rotation/cylinder circuit; reach and interface.
Opening/capacity is not an approved suspended-load rating. Material-specific jaw configuration and machine stability need review.
Plan the work around the attachment
Describe the material
Provide material type, size, shape and expected load. Timber, stone, loose scrap and demolition waste place different demands on the jaws.
Compare the handling envelope
Check opening, attachment mass, mounting and any rotation requirements against pickup, transfer and placement space. An opening dimension is not a rated lifting capacity.
Prepare the support information
Include carrier details, circuit data and photographs of the working task. Ask for the correct wear-part and maintenance information for the proposed configuration.
Available information and source documents
The supplied family material supports this type entry. Complete order configuration, current drawing and applicable operation documents remain part of the model review.
Selection and purchase guidance
Where this tool fits in the work.
Questions specific to this type
What should I compare before choosing Wood & Stone Grapples?
Material dimensions/density; jaw/tooth choice; opening; rotation/cylinder circuit; reach and interface.
Which limits remain important for the purchase?
Opening/capacity is not an approved suspended-load rating. Material-specific jaw configuration and machine stability need review.
