FROM AN IDEA TO A REQUIREMENT
What to specify for this attachment
Use these decisions to turn the work requirement into a model and configuration enquiry.
| Decision | Why it matters | Information to provide |
|---|---|---|
| Hole and ground | The same nominal hole can need different tooling in different ground. | Diameter, depth, ground description and the required result. |
| Drive and shaft | The drive output and the tooling connection belong in one configuration. | Machine flow/pressure, output shaft and mounting information. |
| Auger string | Drive, auger, extension, teeth and pilot are separate specification items. | The intended tooling, any extension and wear-part identification. |
| Reference performance | Source depth/torque values retain their conditions and version. | The exact model, source page and any unresolved data difference. |
View the supplied catalogue drawing and original technical page
Supplier-provided catalogue reference · P03 physical page 4. Check the exact model header, configuration and source version. This excerpt is not a substitute for the current approved installation drawing or a model-specific test report.

Catalogue specifications and source
| Field | Catalogue reference | Source physical page |
|---|---|---|
| Model | WD25 | P03 · p.4 ↗ |
| WEIGHT OF CARRIER,T | 15-22 | P03 · p.4 ↗ |
| MAX. TORQUE, NM | 24800 | P03 · p.4 ↗ |
| OIL PRESSURE, BAR | 160-260 | P03 · p.4 ↗ |
| OIL FLOW,L/MIN | 80-170 | P03 · p.4 ↗ |
| UNIT HEIGHT, MM | 1130 | P03 · p.4 ↗ |
| UNIT DIAMETER, MM | 345 | P03 · p.4 ↗ |
| OUTPUT SHAFT, MM | SQUARE 75 | P03 · p.4 ↗ |
| MAX. OUTPUT SPEED, RPM (P02 reference) | 26 | P02 · p.17 ↗ |
| AUGER DIAMETER REFERENCE, MM | 150-1500 | P02 · p.17 ↗ |
Drawing letters such as A/B refer to the original drawing keys; verify dimensions and units with the current model drawing.
Purpose and task
P02 physical page 17 identifies WD25 in its HD auger-drive group. The drive turns a separately selected auger for hole drilling; the hitch, ground tool and any extension remain part of the proposed configuration.
How this helps your buying decision
Resolve the source unit-weight difference when checking the complete drive, hitch and tooling arrangement. Compare WD25 with WD20 as separate source-listed assemblies. The catalogue torque references are 24800 Nm and 19500 Nm respectively. Their source-listed flow references are 80-170 L/min and 80-170 L/min. Check the carrier definition, mounting, shaft and hydraulic conditions for each option; a higher model number is not an interchangeability approval.
Compare WD25 with WD20 as separate source-listed configurations. For MAX. TORQUE, NM, the listed values are 24800 (WD25) and 19500 (WD20). For OIL FLOW,L/MIN, the listed values are 80-170 (WD25) and 80-170 (WD20). Keep units, mounting position, circuit labels and document conditions with each value. Similar model numbers or overlapping carrier references do not prove fitment, interchangeability or a better result for your task.
Model and configuration
Carrier reference, t: 15-22 (P03 physical page 4); Maximum torque, Nm: 24800 (P03 physical page 4); Hydraulic pressure, bar: 160-260 (P03 physical page 4); Hydraulic flow, L/min: 80-170 (P03 physical page 4); Unit height, mm: 1130 (P03 physical page 4); Unit diameter, mm: 345 (P03 physical page 4); Output shaft, mm: SQUARE 75 (P03 physical page 4). P02 physical page 17 also lists 26 rpm as a maximum output-speed reference. Catalogue values describe the source record, not a confirmed simultaneous running point or a fully installed package.
Machine and interface review
Check the actual machine model, mounting-pin sizes, centres, inside width, installation space and motion clearance. P02 physical page 17 illustrates mounting options; the pictures do not define which hitch, frame or hydraulic connections are included.
Hydraulic, control and installation conditions
P03 physical page 4 lists 160-260 bar and 80-170 L/min for WD25. Identify the proposed control/valve arrangement, hoses, couplings, return and back-pressure requirements against the current hydraulic drawing. Separate catalogue maxima do not establish a continuous-duty point or a complete speed/torque curve.
Structure and differences
The supplied auger-drive family description uses a hydraulic motor and planetary gearbox arrangement. For WD25, check the documented output shaft, drive dimensions and mounted tool package; a family photograph is not evidence of the exact supplied motor, hitch or auger.
Application boundaries
The page retains the unresolved source descriptions, including Drive weight: P02 p.17: 269 kg versus P03 p.4: 345 kg. Ask which drawing and source revision define the offered assembly. Do not select a convenient number from different versions to create a new operating point.
Manufacturing and quality responsibility
WE-ATTACH supports attachment selection, configuration requirements and coordinated supply through core manufacturing partners, with a warehouse and hillside testing site. Request the actual manufacturer, ordered assembly and scope on inspection or compliance records; a partner facility certificate does not certify every listed model.
Documents, parts and operation
Check the WD25 column on P03 physical PDF page 4 and P02 physical page 17, P02 physical page 26. The model-specific links retain the original physical page numbers. The specification CSV identifies the source for each field; a separate version-comparison CSV is available where source differences exist. These are catalogue/selection references. Current installation and hydraulic drawings, operating instructions and a model-specific performance curve must be requested and checked for the actual ordered configuration.
Ground tools and scope of supply
The drive lists a 75 mm square output shaft. P02 physical page 26 supplies related hub, auger and wear-part references. Confirm the complete hub/retaining arrangement, flight length, teeth/pilot, any extension and the ground before choosing the tool. Have the quotation list the drive, hitch/frame, auger, extension, connections and wear parts separately.
Information to send with a WD25 enquiry
For WD25, send the carrier make/model and the meaning of its rated reference; machine/mounting dimensions; hydraulic flow, pressure and return information; hole diameter and depth; ground description; the required auger/extension; quantity and destination. Include units, available drawings and any open source-version questions.
Before confirming the order
Agree the exact WD25 configuration, source/drawing revision, carrier interface, hydraulic conditions and included ground tools. Resolve open parameter versions before converting a catalogue reference into an order requirement. Price, delivery, warranty scope and any required documentation remain quotation-specific.
Source and document traceability
Catalogue transcription for preliminary review. Confirm the applicable configuration and current approved revision before order.
- Excavator Attachment Catalogue ↗ · PDF physical page 4
- Auger Drive Selection Guide ↗ · PDF physical page 17
- Auger Drive Selection Guide ↗ · PDF physical page 26
Applications and working conditions
Selection and purchase guides
Questions before selection
What task does WD25 address?
P02 physical page 17 identifies WD25 in its HD auger-drive group. The drive turns a separately selected auger for hole drilling; the hitch, ground tool and any extension remain part of the proposed configuration.
Which information should accompany a WD25 enquiry?
For WD25, send the carrier make/model and the meaning of its rated reference; machine/mounting dimensions; hydraulic flow, pressure and return information; hole diameter and depth; ground description; the required auger/extension; quantity and destination. Include units, available drawings and any open source-version questions.
What must be checked before confirming this configuration?
The page retains the unresolved source descriptions, including Drive weight: P02 p.17: 269 kg versus P03 p.4: 345 kg. Ask which drawing and source revision define the offered assembly. Do not select a convenient number from different versions to create a new operating point.
Which hydraulic and control conditions matter for WD25?
P03 physical page 4 lists 160-260 bar and 80-170 L/min for WD25. Identify the proposed control/valve arrangement, hoses, couplings, return and back-pressure requirements against the current hydraulic drawing. Separate catalogue maxima do not establish a continuous-duty point or a complete speed/torque curve.
Does the 75 mm square shaft prove that my auger will fit?
The drive lists a 75 mm square output shaft. P02 physical page 26 supplies related hub, auger and wear-part references. Confirm the complete hub/retaining arrangement, flight length, teeth/pilot, any extension and the ground before choosing the tool.
How should I compare WD25 with WD20?
Compare WD25 with WD20 as separate source-listed assemblies. The catalogue torque references are 24800 Nm and 19500 Nm respectively. Their source-listed flow references are 80-170 L/min and 80-170 L/min. Check the carrier definition, mounting, shaft and hydraulic conditions for each option; a higher model number is not an interchangeability approval.
Which source documents and items should accompany a WD25 quotation?
Check the WD25 column on P03 physical PDF page 4 and P02 physical page 17, P02 physical page 26. The model-specific links retain the original physical page numbers. The specification CSV identifies the source for each field; a separate version-comparison CSV is available where source differences exist. These are catalogue/selection references. Current installation and hydraulic drawings, operating instructions and a model-specific performance curve must be requested and checked for the actual ordered configuration. Confirm which mounting, ground tool and connections are included in the quotation.
Related model references
Parameter versions requiring confirmation
These source descriptions are shown side by side. They have not been merged into one approved specification; unaffected catalogue fields are retained above.
| Field | Source description A | Source description B |
|---|---|---|
| Drive weight | P02 p.17: 269 kg | P03 p.4: 345 kg |
| UNIT WEIGHT, KG | P02 p.17: 269 kg | P03 p.4: 345 |
| Medium-ground reference depth at diameter 150 mm | P02 p.17: 8.1 m | P03 p.4: 8.0 m |
Product type and related work stages
Vibratory Pile Drivers
Grip and vibrate the proposed pile section with the WTV excavator-mounted pile-driver range.
4 listed modelsView type, details & selection →Augers, Extensions & Ground Tools
Match augers, extensions and replaceable ground tools to the drive, hole and ground conditions.
Specify your configurationView type, details & selection →