FROM AN IDEA TO A REQUIREMENT
What to specify for this attachment
Use these decisions to turn the work requirement into a model and configuration enquiry.
| Decision | Why it matters | Information to provide |
|---|---|---|
| Hole and ground | The same nominal hole can need different tooling in different ground. | Diameter, depth, ground description and the required result. |
| Drive and shaft | The drive output and the tooling connection belong in one configuration. | Machine flow/pressure, output shaft and mounting information. |
| Auger string | Drive, auger, extension, teeth and pilot are separate specification items. | The intended tooling, any extension and wear-part identification. |
| Reference performance | Source depth/torque values retain their conditions and version. | The exact model, source page and any unresolved data difference. |
View the supplied catalogue drawing and original technical page
Supplier-provided catalogue reference · P03 physical page 4. Check the exact model header, configuration and source version. This excerpt is not a substitute for the current approved installation drawing or a model-specific test report.

Catalogue specifications and source
| Field | Catalogue reference | Source physical page |
|---|---|---|
| Model | WDR6 | P03 · p.4 ↗ |
| MAX. TORQUE, NM | 5470 | P03 · p.4 ↗ |
| OIL PRESSURE, BAR | 80-260 | P03 · p.4 ↗ |
| OIL FLOW,L/MIN | 15-50 | P03 · p.4 ↗ |
| UNIT HEIGHT, MM | 780 | P03 · p.4 ↗ |
| UNIT DIAMETER, MM | 269 | P03 · p.4 ↗ |
| UNIT WEIGHT, KG | 108 | P03 · p.4 ↗ |
| OUTPUT SHAFT, MM | SQUARE 75 | P03 · p.4 ↗ |
| AUGER RANGE, MM MAX.DEEPTH, M (MEDIUM SOIL CONDITIONS) | 150- 3.5M 800- 2.2M | P03 · p.4 ↗ |
| CARRIER REFERENCE (AS PRINTED) | CMU UP TO 15T/M | P03 · p.4 ↗ |
Drawing letters such as A/B refer to the original drawing keys; verify dimensions and units with the current model drawing.
Purpose and task
P03 physical page 4 identifies WDR6 separately from the WD models and prints the carrier reference as "CMU UP TO 15T/M". Keep that exact reference with the proposed carrier; it is not presented here as a plain excavator-tonnage class.
How this helps your buying decision
Check the printed CMU reference, 15-50 L/min circuit and 75 mm square shaft as one mounted configuration. Compare WDR6 with WDR7 as separate source-listed assemblies. The catalogue torque references are 5470 Nm and 6830 Nm respectively. Their source-listed flow references are 15-50 L/min and 15-50 L/min. Check the carrier definition, mounting, shaft and hydraulic conditions for each option; a higher model number is not an interchangeability approval.
Compare WDR6 with WDR3 as separate source-listed configurations. For MAX. TORQUE, NM, the listed values are 5470 (WDR6) and 3100 (WDR3). For OIL FLOW,L/MIN, the listed values are 15-50 (WDR6) and 5-35 (WDR3). Keep units, mounting position, circuit labels and document conditions with each value. Similar model numbers or overlapping carrier references do not prove fitment, interchangeability or a better result for your task.
Model and configuration
Printed carrier reference: CMU UP TO; 15T/M (P03 physical page 4); Maximum torque, Nm: 5470 (P03 physical page 4); Hydraulic pressure, bar: 80-260 (P03 physical page 4); Hydraulic flow, L/min: 15-50 (P03 physical page 4); Unit height, mm: 780 (P03 physical page 4); Unit diameter, mm: 269 (P03 physical page 4); Unit weight, kg: 108 (P03 physical page 4); Output shaft, mm: SQUARE 75 (P03 physical page 4). Catalogue values describe the source record, not a confirmed simultaneous running point or a fully installed package.
Machine and interface review
Confirm the actual carrier, rated mounting arrangement, dimensional envelope and hydraulic supply. The source lists a 75 mm square output shaft. A similar model number or matching shaft dimension alone does not confirm that a WD and WDR assembly can be interchanged.
Hydraulic, control and installation conditions
P03 physical page 4 lists 80-260 bar and 15-50 L/min for WDR6. Identify the proposed control/valve arrangement, hoses, couplings, return and back-pressure requirements against the current hydraulic drawing. Separate catalogue maxima do not establish a continuous-duty point or a complete speed/torque curve.
Structure and differences
The supplied auger-drive family description uses a hydraulic motor and planetary gearbox arrangement. For WDR6, check the documented output shaft, drive dimensions and mounted tool package; a family photograph is not evidence of the exact supplied motor, hitch or auger.
Application boundaries
The WDR6 row supplies reference diameters/depths under medium-soil conditions. It does not define every ground classification, machine installation or tooling option. Keep the proposed hole, material and complete auger string with the review.
Manufacturing and quality responsibility
WE-ATTACH supports attachment selection, configuration requirements and coordinated supply through core manufacturing partners, with a warehouse and hillside testing site. Request the actual manufacturer, ordered assembly and scope on inspection or compliance records; a partner facility certificate does not certify every listed model.
Documents, parts and operation
P03 physical page 4 is the WDR6 drive-data source. The P02 pages linked here are ground-tool references, not an individual WDR installation drawing. The 65 mm round-hub page is not a fitment approval for this 75 mm square shaft. The specification CSV identifies each field source. These are catalogue/selection references. Current installation and hydraulic drawings, operating instructions and a model-specific performance curve must be requested and checked for the actual ordered configuration.
Ground tools and scope of supply
The drive lists a 75 mm square output shaft. P02 physical page 25 supplies related hub, auger and wear-part references. Confirm the complete hub/retaining arrangement, flight length, teeth/pilot, any extension and the ground before choosing the tool. Have the quotation list the drive, hitch/frame, auger, extension, connections and wear parts separately.
Information to send with a WDR6 enquiry
For WDR6, send the carrier make/model and the meaning of its rated reference; machine/mounting dimensions; hydraulic flow, pressure and return information; hole diameter and depth; ground description; the required auger/extension; quantity and destination. Include units, available drawings and any open source-version questions.
Before confirming the order
Agree the exact WDR6 configuration, source/drawing revision, carrier interface, hydraulic conditions and included ground tools. Resolve open parameter versions before converting a catalogue reference into an order requirement. Price, delivery, warranty scope and any required documentation remain quotation-specific.
Source and document traceability
Catalogue transcription for preliminary review. Confirm the applicable configuration and current approved revision before order.
- Excavator Attachment Catalogue ↗ · PDF physical page 4
- Auger Drive Selection Guide ↗ · PDF physical page 24
- Auger Drive Selection Guide ↗ · PDF physical page 25
Applications and working conditions
Selection and purchase guides
Questions before selection
What task does WDR6 address?
P03 physical page 4 identifies WDR6 separately from the WD models and prints the carrier reference as "CMU UP TO 15T/M". Keep that exact reference with the proposed carrier; it is not presented here as a plain excavator-tonnage class.
Which information should accompany a WDR6 enquiry?
For WDR6, send the carrier make/model and the meaning of its rated reference; machine/mounting dimensions; hydraulic flow, pressure and return information; hole diameter and depth; ground description; the required auger/extension; quantity and destination. Include units, available drawings and any open source-version questions.
What must be checked before confirming this configuration?
The WDR6 row supplies reference diameters/depths under medium-soil conditions. It does not define every ground classification, machine installation or tooling option. Keep the proposed hole, material and complete auger string with the review.
Which hydraulic and control conditions matter for WDR6?
P03 physical page 4 lists 80-260 bar and 15-50 L/min for WDR6. Identify the proposed control/valve arrangement, hoses, couplings, return and back-pressure requirements against the current hydraulic drawing. Separate catalogue maxima do not establish a continuous-duty point or a complete speed/torque curve.
Does the 75 mm square shaft prove that my auger will fit?
The drive lists a 75 mm square output shaft. P02 physical page 25 supplies related hub, auger and wear-part references. Confirm the complete hub/retaining arrangement, flight length, teeth/pilot, any extension and the ground before choosing the tool.
How should I compare WDR6 with WDR7?
Compare WDR6 with WDR7 as separate source-listed assemblies. The catalogue torque references are 5470 Nm and 6830 Nm respectively. Their source-listed flow references are 15-50 L/min and 15-50 L/min. Check the carrier definition, mounting, shaft and hydraulic conditions for each option; a higher model number is not an interchangeability approval.
Which source documents and items should accompany a WDR6 quotation?
P03 physical page 4 is the WDR6 drive-data source. The P02 pages linked here are ground-tool references, not an individual WDR installation drawing. The 65 mm round-hub page is not a fitment approval for this 75 mm square shaft. The specification CSV identifies each field source. These are catalogue/selection references. Current installation and hydraulic drawings, operating instructions and a model-specific performance curve must be requested and checked for the actual ordered configuration. Confirm which mounting, ground tool and connections are included in the quotation.
Related model references
Product type and related work stages
Vibratory Pile Drivers
Grip and vibrate the proposed pile section with the WTV excavator-mounted pile-driver range.
4 listed modelsView type, details & selection →Augers, Extensions & Ground Tools
Match augers, extensions and replaceable ground tools to the drive, hole and ground conditions.
Specify your configurationView type, details & selection →