FROM AN IDEA TO A REQUIREMENT
What to specify for this attachment
Use these decisions to turn the work requirement into a model and configuration enquiry.
| Decision | Why it matters | Information to provide |
|---|---|---|
| Required movement | Changing a tool, tilting it and rotating it are separate functions. | The intended tool and movement, with the required angle/clearance. |
| Upper and lower interfaces | A model name or machine class does not define the complete connection. | Machine identity, pin diameter, centres, inside width and existing tool interface. |
| Hydraulic connections | Locking, rotation or tilt may have separate requirements from the connected tool. | Available circuits, flow, pressure, return and required hose arrangement. |
| Installation information | The final arrangement must retain the applicable locking and operating information. | Current mounting drawing, full model/suffix and the intended attachment. |
View the supplied catalogue drawing and original technical page
Supplier-provided catalogue reference · P03 physical page 11. Check the exact model header, configuration and source version. This excerpt is not a substitute for the current approved installation drawing or a model-specific test report.

Catalogue specifications and source
| Field | Catalogue reference | Source physical page |
|---|---|---|
| Model | WTS70 | P03 · p.11 ↗ |
| PIN DIAMETER(ØD),MM | 80-85 | P03 · p.11 ↗ |
| PIN CENTER DISTANCE(C-C),MM | 400-510 | P03 · p.11 ↗ |
| DIPPER WIDTH(W1),MM | 300-390 | P03 · p.11 ↗ |
| TILT ANGLE | ±70° | P03 · p.11 ↗ |
| WORKING PRESSURE,BAR | 30-250 | P03 · p.11 ↗ |
| CYLINDER FLOW RATE,L/MIN | 10-20 | P03 · p.11 ↗ |
| SWING CYLINDER WORKING PRESSURE,BAR | 210-250 | P03 · p.11 ↗ |
| SWING CYLINDER WORKING FLOW,L/MIN | 35-105 | P03 · p.11 ↗ |
| WEIGHT,KG | 700-800 | P03 · p.11 ↗ |
| SUITABLE CARRIER,T | 22-35 | P03 · p.11 ↗ |
Drawing letters such as A/B refer to the original drawing keys; verify dimensions and units with the current model drawing.
Purpose and task
WTS70 is the tilting S coupler reference for slopes and finishing work. Add tool tilt to the WTS S-type coupler arrangement for angled excavation and finishing work.
How this helps your buying decision
The catalogue lists ±70°. Check that movement with the mounting, tool geometry and its separate swing circuit. Compare WTS70 with WTS60 using each complete model row. The listed geometry and any carrier reference are starting points, not approval that the models are interchangeable. Keep any suffix, slash or configuration designation with the order.
Compare WTS70 with WTS60 as separate source-listed configurations. For WEIGHT,KG, the listed values are 700-800 (WTS70) and 550-650 (WTS60). For SUITABLE CARRIER,T, the listed values are 22-35 (WTS70) and 11-20 (WTS60). Keep units, mounting position, circuit labels and document conditions with each value. Similar model numbers or overlapping carrier references do not prove fitment, interchangeability or a better result for your task.
Model and configuration
The model-specific catalogue row states PIN DIAMETER(ØD),MM: 80-85; PIN CENTER DISTANCE(C-C),MM: 400-510; DIPPER WIDTH(W1),MM: 300-390; TILT ANGLE: ±70°; WORKING PRESSURE,BAR: 30-250; CYLINDER FLOW RATE,L/MIN: 10-20; SWING CYLINDER WORKING PRESSURE,BAR: 210-250; SWING CYLINDER WORKING FLOW,L/MIN: 35-105; WEIGHT,KG: 700-800; SUITABLE CARRIER,T: 22-35. Retain the original dimension keys, circuit names, units and source physical page with these values.
Machine and interface review
Measure the actual machine-side and tool-side pin diameters, centre distances and inside widths. Check installation space, tool movement and interference against both interface drawings. Keep upper and lower connections separate even when they look similar.
Hydraulic, control and installation conditions
The source lists WORKING PRESSURE,BAR: 30-250; CYLINDER FLOW RATE,L/MIN: 10-20; SWING CYLINDER WORKING PRESSURE,BAR: 210-250; SWING CYLINDER WORKING FLOW,L/MIN: 35-105. Keep each pressure and flow value with its printed circuit label. Confirm controls, valves, hose/coupling and return requirements for the ordered assembly; connected powered tools have their own hydraulic demands. The swing-cylinder values are separate from coupler actuation. Keep the signed angle and degree symbol as printed rather than treating one number as total travel.
Structure and differences
The supplied table separates pin/centre/width, tilt angle, coupling circuit, swing-cylinder circuit, weight and carrier class.
Application boundaries
The published angles differ by model. Do not transfer a D-type interface or another WTS model’s angle to this configuration. A completed configuration review must identify the actual connected tool, machine and mounting arrangement.
Manufacturing and quality responsibility
WE-ATTACH supports attachment selection, configuration requirements and coordinated supply through core manufacturing partners, with a warehouse and hillside testing site. Keep the actual manufacturer, ordered model and applicable scope with inspection or compliance records. No model-specific certification is established by the catalogue photographs.
Documents, parts and operation
The model references are linked to P03 physical PDF page 11; P05 physical PDF page 9. Use the original drawing keys and the per-field-source CSV to check geometry and circuits. Request the current mounting drawing, hydraulic/control drawing and operating/lock-check instructions for the exact configuration. Catalogue illustrations are not current installation approvals.
Options and scope of supply
Have the quotation identify the coupler, upper/lower interface, pins, locking and actuation arrangement, hydraulic connections and any control components separately. Confirm which items, documents and wear parts are included; a pictured tool or option is not an automatic inclusion.
Information to send with a WTS70 enquiry
For WTS70, send the machine make/model, upper and lower interface dimensions, intended connected tools, desired movement, available circuit data, access/clearance requirements, quantity and destination. Include drawings or photographs and state units with every dimension and hydraulic value.
Before confirming the order
Agree both interface drawings, the complete model designation, locking method, movement/clearance and the required circuits. Keep the accepted drawing and operating-document revisions with the quotation. Price, delivery, warranty and documentary requirements are confirmed for the actual order.
Source and document traceability
Catalogue transcription for preliminary review. Confirm the applicable configuration and current approved revision before order.
- Excavator Attachment Catalogue ↗ · PDF physical page 11
- Quick Coupler Selection Guide ↗ · PDF physical page 9
Applications and working conditions
Selection and purchase guides
Questions before selection
What task does WTS70 address?
WTS70 is the tilting S coupler reference for slopes and finishing work. Add tool tilt to the WTS S-type coupler arrangement for angled excavation and finishing work.
Which information should accompany a WTS70 enquiry?
For WTS70, send the machine make/model, upper and lower interface dimensions, intended connected tools, desired movement, available circuit data, access/clearance requirements, quantity and destination. Include drawings or photographs and state units with every dimension and hydraulic value.
What must be checked before confirming this configuration?
The published angles differ by model. Do not transfer a D-type interface or another WTS model’s angle to this configuration. A completed configuration review must identify the actual connected tool, machine and mounting arrangement.
Which mounting dimensions should I compare for WTS70?
Measure the actual machine-side and tool-side pin diameters, centre distances and inside widths. Check installation space, tool movement and interference against both interface drawings. Keep upper and lower connections separate even when they look similar.
Which hydraulic and control information belongs to WTS70?
The source lists WORKING PRESSURE,BAR: 30-250; CYLINDER FLOW RATE,L/MIN: 10-20; SWING CYLINDER WORKING PRESSURE,BAR: 210-250; SWING CYLINDER WORKING FLOW,L/MIN: 35-105. Keep each pressure and flow value with its printed circuit label. Confirm controls, valves, hose/coupling and return requirements for the ordered assembly; connected powered tools have their own hydraulic demands. The swing-cylinder values are separate from coupler actuation. Keep the signed angle and degree symbol as printed rather than treating one number as total travel.
How should I compare WTS70 with another coupler?
Compare WTS70 with WTS60 using each complete model row. The listed geometry and any carrier reference are starting points, not approval that the models are interchangeable. Keep any suffix, slash or configuration designation with the order. The published angles differ by model. Do not transfer a D-type interface or another WTS model’s angle to this configuration.
What documents and supplied items should a WTS70 quotation identify?
The model references are linked to P03 physical PDF page 11; P05 physical PDF page 9. Use the original drawing keys and the per-field-source CSV to check geometry and circuits. Request the current mounting drawing, hydraulic/control drawing and operating/lock-check instructions for the exact configuration. Catalogue illustrations are not current installation approvals. Have the quotation identify the coupler, upper/lower interface, pins, locking and actuation arrangement, hydraulic connections and any control components separately. Confirm which items, documents and wear parts are included; a pictured tool or option is not an automatic inclusion.
Related model references
Product type and related work stages
Double-lock S Couplers
Connect tools through the WSQ S-type double-lock coupler range; compare the exact S-interface geometry.
10 listed modelsView type, details & selection →Rotating Couplers
Rotate a connected excavator attachment through 360° with the R-series rotary quick coupler.
3 listed modelsView type, details & selection →Tilting D Couplers
Tilt a connected attachment for slopes, trenches and angled work with the WTD D-type coupler.
6 listed modelsView type, details & selection →