Excavator attachment supply · Ningbo, China Search · FAQ · Support · Market / EnglishWhatsApp +86 15058273161
WE-ATTACH

Rippers

Ripper

MODEL WR08

WR08 ripper for loosening resistant ground before excavation. Share your machine and job details to review the setup.

Measure pin diameter, centres and inside width; compare tip reach and the single-shank envelope with the machine and proposed material.

Opening Width, Mm
300-360
Suitable Excavator, T
17-23
Supplied ripper family image; it does not identify every WR08 option, interface or included accessory.

FROM AN IDEA TO A REQUIREMENT

What to specify for this attachment

Use these decisions to turn the work requirement into a model and configuration enquiry.

Information to carry into the review
DecisionWhy it mattersInformation to provide
Ground and work stageLoosening resistant material is distinct from excavating or crushing it.Ground/material and the result needed before the next operation.
Geometry and connectionThe shank, mounting and machine envelope must be reviewed together.Carrier, pin dimensions, centre distances and clearance.
Tooth and wear partsThe replaceable working tip stays with the specified arrangement.Tooth identity, wear requirements and relevant drawing information.
View the supplied catalogue drawing and original technical page

Supplier-provided catalogue reference · P03 physical page 36. Check the exact model header, configuration and source version. This excerpt is not a substitute for the current approved installation drawing or a model-specific test report.

Original supplied catalogue technical page 36

Catalogue specifications and source

Original units retained; not a machine compatibility approval
FieldCatalogue referenceSource physical page
ModelWR08P03 · p.36 ↗
OPENING WIDTH, MM300-360P03 · p.36 ↗
CENTER DISTANCE, MM400-510P03 · p.36 ↗
SHAFT DIAMETER, MM80-90P03 · p.36 ↗
HEIGHT, MM1360P03 · p.36 ↗
MAIN PLATE THICKNESS, MM80P03 · p.36 ↗
BUCKET TOOTH MODELD85P03 · p.36 ↗
WEIGHT(EXCLUDING PINS), KG450P03 · p.36 ↗
SUITABLE EXCAVATOR, T17-23P03 · p.36 ↗

Drawing letters such as A/B refer to the original drawing keys; verify dimensions and units with the current model drawing.

Purpose and task

WR08 is the ripper reference for loosening resistant ground before excavation. Loosen resistant ground or material with the WR single-shank excavator-ripper range.

How this helps your buying decision

Measure pin diameter, centres and inside width; compare tip reach and the single-shank envelope with the machine and proposed material. Compare WR08 with WR06 as separate source-listed configurations. For OPENING WIDTH, MM, the listed values are 300-360 (WR08) and 220-300 (WR06). For WEIGHT(EXCLUDING PINS), KG, the listed values are 450 (WR08) and 270 (WR06). Keep units, mounting position, circuit labels and document conditions with each value. Similar model numbers or overlapping carrier references do not prove fitment, interchangeability or a better result for your task.

Model and configuration

The model-specific source row states: OPENING WIDTH, MM: 300-360; CENTER DISTANCE, MM: 400-510; SHAFT DIAMETER, MM: 80-90; HEIGHT, MM: 1360; MAIN PLATE THICKNESS, MM: 80; BUCKET TOOTH MODEL: D85; WEIGHT(EXCLUDING PINS), KG: 450; SUITABLE EXCAVATOR, T: 17-23. Retain the printed units, dimension keys and applicable circuit or mounting labels; unknown drawing units require confirmation rather than conversion.

Machine and interface review

Measure pin diameter, centres and inside width; compare tip reach and the single-shank envelope with the machine and proposed material. Check mounting pins, centres, inside width, overall envelope and clearance through the intended movement against the actual assembly drawing. Catalogue carrier references are preliminary selection information, not machine-specific approval.

Installation, control and operating conditions

Review the mechanical connection, linkage, swept movement and retaining/locking details against the current installation drawing. No additional grapple or ripper hydraulic input is assigned from a different product family. This is a mechanical attachment. Source weight excludes pins; carrier reference and tooth code do not guarantee a material hardness or ripping production rate.

Structure and differences

The supplied product text describes side reinforcement and a replaceable tip/tooth; WR models have their own interface and geometry rows. This is a mechanical attachment. Source weight excludes pins; carrier reference and tooth code do not guarantee a material hardness or ripping production rate.

Application boundaries

A ripper is not a compactor. No production rate or material hardness capability follows from the carrier reference alone.

Manufacturing and quality responsibility

WE-ATTACH supports attachment selection, configuration requirements and coordinated supply through core manufacturing partners, with a warehouse and hillside testing site. Keep the actual manufacturer, ordered model and applicable scope with inspection, material or compliance records. A partner facility certificate or catalogue image is not model-specific product approval.

Documents, parts and operation

Use P03 physical PDF page 36 and the model-reference CSV linked on this page. Each exported parameter retains its source ID and physical page. Catalogue sketches, source images and selection tables are reference information; request the current mounting/connection drawing, operating and maintenance instructions and model-specific evidence for the actual ordered configuration.

Options and scope of supply

Specify the tooth/tip and retaining parts, shank, mounting pins and any wear/repair components; confirm tooth-reference compatibility. Have the quotation identify the attachment, mounting, controls/connections, included accessories and required parts individually. A pictured option, support frame or related tool is not automatically included.

Information to send with a WR08 enquiry

For WR08, send machine make/model and operating weight; mounting/linkage dimensions; available circuit and return information where applicable; material, work stage, access/reach and desired result; Material; tooth configuration; pin/centre/width; reach; current drawing and work arrangement. Include quantity, destination and any drawings/photos. State units and identify unknown values rather than substituting a similar machine or model.

Before confirming the order

Agree the complete model and suffix, actual machine, interfaces, operating conditions and scope of supply. Keep unresolved source descriptions and accepted drawing/document revisions with the quotation. Confirm inspection/document requirements, price, delivery, warranty and service scope for the actual order; no unverified term or performance commitment is added here.

Source and document traceability

Catalogue transcription for preliminary review. Confirm the applicable configuration and current approved revision before order.

Applications and working conditions

Selection and purchase guides

Questions before selection

What task does WR08 address?

WR08 is the ripper reference for loosening resistant ground before excavation. Loosen resistant ground or material with the WR single-shank excavator-ripper range.

Which information should accompany a WR08 enquiry?

For WR08, send machine make/model and operating weight; mounting/linkage dimensions; available circuit and return information where applicable; material, work stage, access/reach and desired result; Material; tooth configuration; pin/centre/width; reach; current drawing and work arrangement. Include quantity, destination and any drawings/photos. State units and identify unknown values rather than substituting a similar machine or model.

What must be checked before confirming this configuration?

A ripper is not a compactor. No production rate or material hardness capability follows from the carrier reference alone.

How should I compare WR08 with another configuration?

Compare WR08 with WR06 as separate source-listed configurations. For OPENING WIDTH, MM, the listed values are 300-360 (WR08) and 220-300 (WR06). For WEIGHT(EXCLUDING PINS), KG, the listed values are 450 (WR08) and 270 (WR06). Keep units, mounting position, circuit labels and document conditions with each value. Similar model numbers or overlapping carrier references do not prove fitment, interchangeability or a better result for your task. This is a mechanical attachment. Source weight excludes pins; carrier reference and tooth code do not guarantee a material hardness or ripping production rate.

What installation and operating information is needed for WR08?

Measure pin diameter, centres and inside width; compare tip reach and the single-shank envelope with the machine and proposed material. Review the mechanical connection, linkage, swept movement and retaining/locking details against the current installation drawing. No additional grapple or ripper hydraulic input is assigned from a different product family.

Where can I check the source and current documents for WR08?

Use P03 physical PDF page 36 and the model-reference CSV linked on this page. Each exported parameter retains its source ID and physical page. Catalogue sketches, source images and selection tables are reference information; request the current mounting/connection drawing, operating and maintenance instructions and model-specific evidence for the actual ordered configuration.

Which parts and options should the WR08 quotation identify?

Specify the tooth/tip and retaining parts, shank, mounting pins and any wear/repair components; confirm tooth-reference compatibility. Confirm the exact configuration and each included item rather than using a family illustration as a packing list.

Related model references

Where this tool fits in the work.

Discuss WR08 with your project conditions

Missing a technical value? Describe what is available so the next information needed can be identified.

CONTINUE YOUR REVIEW

Related information for your next decision

Discuss your machine, application and configuration →

What do you need to do?

Start with part of a model or describe the job. Suggested results are for selection review.