FROM AN IDEA TO A REQUIREMENT
What to specify for this attachment
Use these decisions to turn the work requirement into a model and configuration enquiry.
| Decision | Why it matters | Information to provide |
|---|---|---|
| Task and contact geometry | Digging, cleaning, grading, gripping, crushing and screening are different work stages. | The job and required surface, opening or output fraction. |
| Material and capacity definition | Width or nominal volume alone does not describe the working load. | Material size, density/moisture and width/capacity requirements. |
| Edge, teeth or process parts | Wear and working parts depend on the selected bucket arrangement. | Required edge/teeth, screen or crushing configuration. |
| Machine and powered functions | The mounting and any powered movement must be reviewed with the machine. | Carrier, connection dimensions and hydraulic information where applicable. |
View the supplied catalogue drawing and original technical page
Supplier-provided catalogue reference · P03 physical page 39. Check the exact model header, configuration and source version. This excerpt is not a substitute for the current approved installation drawing or a model-specific test report.

Catalogue specifications and source
| Field | Catalogue reference | Source physical page |
|---|---|---|
| Model | WTB02 | P03 · p.39 ↗ |
| WIDTH, MM | 1500 | P03 · p.39 ↗ |
| WEIGHT, KG | 220 | P03 · p.39 ↗ |
| CAPACITY, M3 | 0.225 | P03 · p.39 ↗ |
| MAX. OPERATINGPRESSURE, BAR | 230 | P03 · p.39 ↗ |
| TILT OIL FLOW, L/MIN | 15-20 | P03 · p.39 ↗ |
| SUITABLE EXCAVATOR,T | 5-6 | P03 · p.39 ↗ |
Drawing letters such as A/B refer to the original drawing keys; verify dimensions and units with the current model drawing.
Purpose and task
WTB02 is the tilt bucket reference for grading and trench finishing. Adjust the bucket angle for grading, slopes and trench finishing with the WTB tilting-bucket range.
How this helps your buying decision
Compare bucket width and mass with the finish profile, available access and mounting geometry. Check tool movement throughout the intended tilt. Compare WTB02 with WTB01 as separate source-listed configurations. For TILT OIL FLOW, L/MIN, the listed values are 15-20 (WTB02) and 13-18 (WTB01). For WEIGHT, KG, the listed values are 220 (WTB02) and 135 (WTB01). Keep units, mounting position, circuit labels and document conditions with each value. Similar model numbers or overlapping carrier references do not prove fitment, interchangeability or a better result for your task.
Model and configuration
The model-specific source row states: WIDTH, MM: 1500; WEIGHT, KG: 220; CAPACITY, M3: 0.225; MAX. OPERATINGPRESSURE, BAR: 230; TILT OIL FLOW, L/MIN: 15-20; SUITABLE EXCAVATOR,T: 5-6. Retain the printed units, dimension keys and applicable circuit or mounting labels; unknown drawing units require confirmation rather than conversion.
Machine and interface review
Compare bucket width and mass with the finish profile, available access and mounting geometry. Check tool movement throughout the intended tilt. Check mounting pins, centres, inside width, overall envelope and clearance through the intended movement against the actual assembly drawing. Catalogue carrier references are preliminary selection information, not machine-specific approval.
Installation, control and operating conditions
The source lists MAX. OPERATINGPRESSURE, BAR: 230; TILT OIL FLOW, L/MIN: 15-20. Check the actual machine flow/pressure at the intended settings, control/valve arrangement, hose/coupling dimensions, return/back-pressure and any case-drain requirement against the current hydraulic drawing. Separate catalogue ranges or maxima do not establish one approved simultaneous running point. The model table records width, capacity and cylinder hydraulic inputs. Confirm the actual tilt angle and cylinder arrangement for the ordered model rather than treating a family description as a certified angle.
Structure and differences
The WTB source table gives width, weight and carrier references; the supplied product text describes a cylinder/balance-control tilting arrangement. The model table records width, capacity and cylinder hydraulic inputs. Confirm the actual tilt angle and cylinder arrangement for the ordered model rather than treating a family description as a certified angle.
Application boundaries
Confirm the exact angle and cylinder arrangement for the ordered model rather than assigning a family-wide angle.
Manufacturing and quality responsibility
WE-ATTACH supports attachment selection, configuration requirements and coordinated supply through core manufacturing partners, with a warehouse and hillside testing site. Keep the actual manufacturer, ordered model and applicable scope with inspection, material or compliance records. A partner facility certificate or catalogue image is not model-specific product approval.
Documents, parts and operation
Use P03 physical PDF page 39; P03 physical PDF page 40 and the model-reference CSV linked on this page. Each exported parameter retains its source ID and physical page. Catalogue sketches, source images and selection tables are reference information; request the current mounting/connection drawing, operating and maintenance instructions and model-specific evidence for the actual ordered configuration.
Options and scope of supply
Confirm cutting edge/wear parts, mounting, cylinder/control and hoses; keep the approved clearance drawing with the configuration. Have the quotation identify the attachment, mounting, controls/connections, included accessories and required parts individually. A pictured option, support frame or related tool is not automatically included.
Information to send with a WTB02 enquiry
For WTB02, send machine make/model and operating weight; mounting/linkage dimensions; available circuit and return information where applicable; material, work stage, access/reach and desired result; Width; desired tilt; terrain/task; interface; cylinder circuit; clearance. Include quantity, destination and any drawings/photos. State units and identify unknown values rather than substituting a similar machine or model.
Before confirming the order
Agree the complete model and suffix, actual machine, interfaces, operating conditions and scope of supply. Keep unresolved source descriptions and accepted drawing/document revisions with the quotation. Confirm inspection/document requirements, price, delivery, warranty and service scope for the actual order; no unverified term or performance commitment is added here.
Source and document traceability
Catalogue transcription for preliminary review. Confirm the applicable configuration and current approved revision before order.
- Excavator Attachment Catalogue ↗ · PDF physical page 39
- Excavator Attachment Catalogue ↗ · PDF physical page 40
Applications and working conditions
Selection and purchase guides
Questions before selection
What task does WTB02 address?
WTB02 is the tilt bucket reference for grading and trench finishing. Adjust the bucket angle for grading, slopes and trench finishing with the WTB tilting-bucket range.
Which information should accompany a WTB02 enquiry?
For WTB02, send machine make/model and operating weight; mounting/linkage dimensions; available circuit and return information where applicable; material, work stage, access/reach and desired result; Width; desired tilt; terrain/task; interface; cylinder circuit; clearance. Include quantity, destination and any drawings/photos. State units and identify unknown values rather than substituting a similar machine or model.
What must be checked before confirming this configuration?
Confirm the exact angle and cylinder arrangement for the ordered model rather than assigning a family-wide angle.
How should I compare WTB02 with another configuration?
Compare WTB02 with WTB01 as separate source-listed configurations. For TILT OIL FLOW, L/MIN, the listed values are 15-20 (WTB02) and 13-18 (WTB01). For WEIGHT, KG, the listed values are 220 (WTB02) and 135 (WTB01). Keep units, mounting position, circuit labels and document conditions with each value. Similar model numbers or overlapping carrier references do not prove fitment, interchangeability or a better result for your task. The model table records width, capacity and cylinder hydraulic inputs. Confirm the actual tilt angle and cylinder arrangement for the ordered model rather than treating a family description as a certified angle.
What installation and operating information is needed for WTB02?
Compare bucket width and mass with the finish profile, available access and mounting geometry. Check tool movement throughout the intended tilt. The source lists MAX. OPERATINGPRESSURE, BAR: 230; TILT OIL FLOW, L/MIN: 15-20. Check the actual machine flow/pressure at the intended settings, control/valve arrangement, hose/coupling dimensions, return/back-pressure and any case-drain requirement against the current hydraulic drawing. Separate catalogue ranges or maxima do not establish one approved simultaneous running point.
Where can I check the source and current documents for WTB02?
Use P03 physical PDF page 39; P03 physical PDF page 40 and the model-reference CSV linked on this page. Each exported parameter retains its source ID and physical page. Catalogue sketches, source images and selection tables are reference information; request the current mounting/connection drawing, operating and maintenance instructions and model-specific evidence for the actual ordered configuration.
Which parts and options should the WTB02 quotation identify?
Confirm cutting edge/wear parts, mounting, cylinder/control and hoses; keep the approved clearance drawing with the configuration. Confirm the exact configuration and each included item rather than using a family illustration as a packing list.
Related model references
Product type and related work stages
Tilting D Couplers
Tilt a connected attachment for slopes, trenches and angled work with the WTD D-type coupler.
6 listed modelsView type, details & selection →Clamshell Buckets
Excavate and transfer material with the opening-and-closing clamshell bucket arrangement.
2 listed modelsView type, details & selection →Cleaning Buckets
Clean and shape ditches or finish surfaces with a wide, toothless cleaning-bucket form.
Specify your configurationView type, details & selection →Digging Buckets
Excavate soil and mixed ground with the supplied toothed digging-bucket form.
Specify your configurationView type, details & selection →