FROM AN IDEA TO A REQUIREMENT
What to specify for this attachment
Use these decisions to turn the work requirement into a model and configuration enquiry.
| Decision | Why it matters | Information to provide |
|---|---|---|
| Task and contact geometry | Digging, cleaning, grading, gripping, crushing and screening are different work stages. | The job and required surface, opening or output fraction. |
| Material and capacity definition | Width or nominal volume alone does not describe the working load. | Material size, density/moisture and width/capacity requirements. |
| Edge, teeth or process parts | Wear and working parts depend on the selected bucket arrangement. | Required edge/teeth, screen or crushing configuration. |
| Machine and powered functions | The mounting and any powered movement must be reviewed with the machine. | Carrier, connection dimensions and hydraulic information where applicable. |
View the supplied catalogue drawing and original technical page
Supplier-provided catalogue reference · P03 physical page 39. Check the exact model header, configuration and source version. This excerpt is not a substitute for the current approved installation drawing or a model-specific test report.

Catalogue specifications and source
| Field | Catalogue reference | Source physical page |
|---|---|---|
| Model | WCB08-V2 | P03 · p.39 ↗ |
| MAX. OPENING, MM | 2150 | P03 · p.39 ↗ |
| WEIGHT, KG | 1760 | P03 · p.39 ↗ |
| CAPACITY, M3 | 2 | P03 · p.39 ↗ |
| MAX. OPERATINGPRESSURE, BAR | 200-250 | P03 · p.39 ↗ |
| GRASPING FLOW RATE, L/MIN | 100-140 | P03 · p.39 ↗ |
| MAX. ROTATINGPRESSURE, BAR | 120-160 | P03 · p.39 ↗ |
| ROTATING OPERATING FLOW, L/MIN | 30-50 | P03 · p.39 ↗ |
| SUITABLE EXCAVATOR, T | 17-24 | P03 · p.39 ↗ |
Drawing letters such as A/B refer to the original drawing keys; verify dimensions and units with the current model drawing.
Purpose and task
WCB08-V2 is the clamshell bucket reference for bulk-material excavation and transfer. Excavate and transfer material with the opening-and-closing clamshell bucket arrangement.
How this helps your buying decision
Describe material/density, pit depth/reach, mounting and the intended load. Review the complete bucket and carrier stability. Compare WCB08-V2 with WCB08R-V2 as separate source-listed configurations. For MAX. OPENING, MM, the listed values are 2150 (WCB08-V2) and 2150 (WCB08R-V2). For WEIGHT, KG, the listed values are 1760 (WCB08-V2) and 2110 (WCB08R-V2). Keep units, mounting position, circuit labels and document conditions with each value. Similar model numbers or overlapping carrier references do not prove fitment, interchangeability or a better result for your task.
Model and configuration
The model-specific source row states: MAX. OPENING, MM: 2150; WEIGHT, KG: 1760; CAPACITY, M3: 2; MAX. OPERATINGPRESSURE, BAR: 200-250; GRASPING FLOW RATE, L/MIN: 100-140; MAX. ROTATINGPRESSURE, BAR: 120-160; ROTATING OPERATING FLOW, L/MIN: 30-50; SUITABLE EXCAVATOR, T: 17-24. Retain the printed units, dimension keys and applicable circuit or mounting labels; unknown drawing units require confirmation rather than conversion.
Machine and interface review
Describe material/density, pit depth/reach, mounting and the intended load. Review the complete bucket and carrier stability. Check mounting pins, centres, inside width, overall envelope and clearance through the intended movement against the actual assembly drawing. Catalogue carrier references are preliminary selection information, not machine-specific approval.
Installation, control and operating conditions
The source lists MAX. OPERATINGPRESSURE, BAR: 200-250; GRASPING FLOW RATE, L/MIN: 100-140; MAX. ROTATINGPRESSURE, BAR: 120-160. Check the actual machine flow/pressure at the intended settings, control/valve arrangement, hose/coupling dimensions, return/back-pressure and any case-drain requirement against the current hydraulic drawing. Separate catalogue ranges or maxima do not establish one approved simultaneous running point. Keep WCB08-V2 and WCB08R-V2 separate. The source labels R as the rotating version while printing rotation input rows for both; confirm whether rotation equipment is included for the exact order.
Structure and differences
The supplied text describes a linkage mechanism and motor-driven rotation; WCB08-V2 and WCB08R-V2 remain separate models. Keep WCB08-V2 and WCB08R-V2 separate. The source labels R as the rotating version while printing rotation input rows for both; confirm whether rotation equipment is included for the exact order.
Application boundaries
An opening dimension does not establish volume, safe handled load or applicability to every foundation-pit arrangement.
Manufacturing and quality responsibility
WE-ATTACH supports attachment selection, configuration requirements and coordinated supply through core manufacturing partners, with a warehouse and hillside testing site. Keep the actual manufacturer, ordered model and applicable scope with inspection, material or compliance records. A partner facility certificate or catalogue image is not model-specific product approval.
Documents, parts and operation
Use P03 physical PDF page 39 and the model-reference CSV linked on this page. Each exported parameter retains its source ID and physical page. Catalogue sketches, source images and selection tables are reference information; request the current mounting/connection drawing, operating and maintenance instructions and model-specific evidence for the actual ordered configuration.
Options and scope of supply
List bucket, mounting, closing mechanism, any rotation head and hydraulic connections; agree capacity and material conditions. Have the quotation identify the attachment, mounting, controls/connections, included accessories and required parts individually. A pictured option, support frame or related tool is not automatically included.
Information to send with a WCB08-V2 enquiry
For WCB08-V2, send machine make/model and operating weight; mounting/linkage dimensions; available circuit and return information where applicable; material, work stage, access/reach and desired result; Material/density; opening; pit/reach; rotation circuit; interface and load definition. Include quantity, destination and any drawings/photos. State units and identify unknown values rather than substituting a similar machine or model.
Before confirming the order
Agree the complete model and suffix, actual machine, interfaces, operating conditions and scope of supply. Keep unresolved source descriptions and accepted drawing/document revisions with the quotation. Confirm inspection/document requirements, price, delivery, warranty and service scope for the actual order; no unverified term or performance commitment is added here.
Source and document traceability
Catalogue transcription for preliminary review. Confirm the applicable configuration and current approved revision before order.
- Excavator Attachment Catalogue ↗ · PDF physical page 39
Applications and working conditions
Selection and purchase guides
Questions before selection
What task does WCB08-V2 address?
WCB08-V2 is the clamshell bucket reference for bulk-material excavation and transfer. Excavate and transfer material with the opening-and-closing clamshell bucket arrangement.
Which information should accompany a WCB08-V2 enquiry?
For WCB08-V2, send machine make/model and operating weight; mounting/linkage dimensions; available circuit and return information where applicable; material, work stage, access/reach and desired result; Material/density; opening; pit/reach; rotation circuit; interface and load definition. Include quantity, destination and any drawings/photos. State units and identify unknown values rather than substituting a similar machine or model.
What must be checked before confirming this configuration?
An opening dimension does not establish volume, safe handled load or applicability to every foundation-pit arrangement.
How should I compare WCB08-V2 with another configuration?
Compare WCB08-V2 with WCB08R-V2 as separate source-listed configurations. For MAX. OPENING, MM, the listed values are 2150 (WCB08-V2) and 2150 (WCB08R-V2). For WEIGHT, KG, the listed values are 1760 (WCB08-V2) and 2110 (WCB08R-V2). Keep units, mounting position, circuit labels and document conditions with each value. Similar model numbers or overlapping carrier references do not prove fitment, interchangeability or a better result for your task. Keep WCB08-V2 and WCB08R-V2 separate. The source labels R as the rotating version while printing rotation input rows for both; confirm whether rotation equipment is included for the exact order.
What installation and operating information is needed for WCB08-V2?
Describe material/density, pit depth/reach, mounting and the intended load. Review the complete bucket and carrier stability. The source lists MAX. OPERATINGPRESSURE, BAR: 200-250; GRASPING FLOW RATE, L/MIN: 100-140; MAX. ROTATINGPRESSURE, BAR: 120-160. Check the actual machine flow/pressure at the intended settings, control/valve arrangement, hose/coupling dimensions, return/back-pressure and any case-drain requirement against the current hydraulic drawing. Separate catalogue ranges or maxima do not establish one approved simultaneous running point.
Where can I check the source and current documents for WCB08-V2?
Use P03 physical PDF page 39 and the model-reference CSV linked on this page. Each exported parameter retains its source ID and physical page. Catalogue sketches, source images and selection tables are reference information; request the current mounting/connection drawing, operating and maintenance instructions and model-specific evidence for the actual ordered configuration.
Which parts and options should the WCB08-V2 quotation identify?
List bucket, mounting, closing mechanism, any rotation head and hydraulic connections; agree capacity and material conditions. Confirm the exact configuration and each included item rather than using a family illustration as a packing list.
Related model references
Product type and related work stages
Mechanical Grapples
Grip material using the WGM mechanical-grapple configuration.
4 listed modelsView type, details & selection →Crushing Buckets
Reduce suitable material at the excavator with the WBC crushing-bucket range.
2 listed modelsView type, details & selection →Screening Buckets
Separate material by size using the WSB rotating screening-bucket range and the specified screen opening.
3 listed modelsView type, details & selection →Tilt Buckets
Adjust the bucket angle for grading, slopes and trench finishing with the WTB tilting-bucket range.
2 listed modelsView type, details & selection →Hydraulic Thumbs
Use a separately matched hydraulic thumb and bucket to retain suitable material during handling.
Specify your configurationView type, details & selection →Hydraulic 3-in-1 Multi-purpose Buckets
Combine bucket work and material gripping with the supplied hydraulic multi-purpose bucket form.
Specify your configurationView type, details & selection →